Axis Communications 216FD user manual Adjusting the image, Adjustment

Page 11

AXIS 216FD - Accessing the Camera 11

Adjusting the image

	Image	Focus
	balance	puller
		Zoom puller
	ring
	Tilt	Tilt
	adjustment
		adjustment
	screw
		screw

Locking screw

1.Open the Live View page in the Web interface and make the following adjustments on the camera:

2.Loosen the locking screw and tilt adjustment screws.

3.Turn the lens to the desired position.

4.Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the camera’s position.

5.Turn the image balance ring to set the horizontal position.

6.Open the Focus Adjustment page in the Web interface under Basic Configuration > Focus and follow the on-screen instructions. Use the image window to adjust the focus and zoom.

•To set the focus and zoom, loosen the zoom and focus pullers counterclockwise and rotate the rings.

•Lock the focus and zoom pullers in position by rotating the screws clockwise.

Image 11

Contents Axis 216FD Fixed Dome Network Camera User’s Manual About this Document Support Contents Axis 216FD Key features Product FeaturesOverview DC, this output has an open-collector NPN transistor with Terminal connectorLED indicators With a maximum load of 50mA and a maximum voltageAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the PasswordAdjustment Adjusting the imageLive View AMC audio controls Video Streams How to stream MPEG-4QuickTime & Real Player MPEG-4 clientsMotion Jpeg Axis Media Control AMCAlternative methods of accessing the video stream Axis Media Control ConfigurationAccessing the Setup tools Image Appearance Video and Image settingsOverlay/Mask Text Overlay SettingsAdvanced Camera Settings Video StreamBit Rate Control Advanced MPEG-4 Settings GOV SettingsLow Light Behavior Microphone Audio SettingsEnable Audio AudioAudio Input Audio modeAudio Channels Audio Output Layout Live View ConfigOwn Home Customizing the defaultUpload Own Web Files Output Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeAMC Settings Html ExamplesDefinitions Event ConfigurationEvent Servers Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusReferrals System OptionsSecurity IP Address FilteringHttps Date & TimeServices Network Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings IP Address ConfigurationNAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressWAN internet Network Traffic Smtp emailUPnP Ports & Devices LED SettingsMaintenance Support ConfigurationAdvanced Resetting to the Factory Default SettingsUsing the Control Button Pinout and Interface I/O Terminal ConnectorTerminal connector Terminal Connectors Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureBrowser Camera is accessible locally, but not externallyAre flashing red rapidly Power indicator is not constantly litCamera is inaccessible Decode only I framesNo audio Problems uploading filesAudio volume too low/high Is enabled under System Options Date & TimeLens Technical SpecificationsClock Approvals General performance considerationsOptimizing your system Bandwidth Frame rates Motion Jpeg and MPEG-4Compression See Image Compression Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 216FD Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network AMC IndexSnmp Axis 216FD Index

Related manuals

Manual 39 pages 20.76 Kb