Axis Communications 216FD Audio Settings, Enable Audio, Microphone, Internal microphone

Page 21

AXIS 216FD - Audio 21

Audio

The AXIS 216FD can transmit audio to other clients using either the built-in microphone or a connected external microphone and can play audio received from other clients via a connected speaker.

Note: The speaker connected to the audio output must have a built-in amplifier, e.g. PC speakers.

Client PC	Internal
	microphone
	TCP/IP Network

Internal microphone

An example of a network using AXIS 216FD cameras to transmit audio and video across the network.

Audio Settings

This section describes how to configure the basic audio settings for the AXIS 216FD, e.g. set the communication mode and adjust the sound levels in the microphone and speaker connected to the camera.

Enable Audio

Check this box to enable audio in the AXIS 216FD.

Image 21

Contents Axis 216FD Fixed Dome Network Camera User’s Manual About this Document Support Contents Axis 216FD Key features Product FeaturesOverview LED indicators Terminal connectorWith a maximum load of 50mA and a maximum voltage DC, this output has an open-collector NPN transistor withAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the PasswordAdjustment Adjusting the imageLive View AMC audio controls Video Streams How to stream MPEG-4Motion Jpeg MPEG-4 clientsAxis Media Control AMC QuickTime & Real PlayerAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Image Appearance Video and Image settingsAdvanced Camera Settings Text Overlay SettingsVideo Stream Overlay/MaskAdvanced MPEG-4 Settings GOV Settings Low Light BehaviorBit Rate Control Enable Audio Audio SettingsAudio MicrophoneAudio mode Audio ChannelsAudio Input Audio Output Layout Live View ConfigCustomizing the default Upload Own Web FilesOwn Home Default Viewer Default Video FormatAction Buttons Output ButtonsAMC Settings Sequence ModeHtml Examples External VideoEvent Configuration Event ServersDefinitions How to set up a triggered event Configuring Event TypesTriggered Event Click Add triggered on the Event typesScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusSecurity System OptionsIP Address Filtering ReferralsHttps Date & TimeNetwork Advanced TCP/IP Settings Network Basic TCP/IP SettingsIP Address Configuration ServicesHost Name Configuration NTP ConfigurationLink-Local Address NAT traversal port mappingWAN internet Smtp email UPnPNetwork Traffic LED Settings MaintenancePorts & Devices Support ConfigurationResetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Terminal connectorPinout and Interface Terminal Connectors Basic Configuration TroubleshootingChecking the Firmware Upgrading the FirmwareAxis Support Emergency Recovery ProcedureBrowser Camera is accessible locally, but not externallyCamera is inaccessible Power indicator is not constantly litDecode only I frames Are flashing red rapidlyAudio volume too low/high Problems uploading filesIs enabled under System Options Date & Time No audioLens Technical SpecificationsClock Approvals General performance considerationsOptimizing your system Bandwidth Frame rates Motion Jpeg and MPEG-4Compression See Image Compression Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 216FD Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network AMC IndexSnmp Axis 216FD Index

Related manuals

Manual 39 pages 20.76 Kb