Axis Communications 216FD user manual Ports & Devices, LED Settings, Maintenance

Page 39

AXIS 216FD - System Options 39

the Networking Services section. Click Details and then select UPnP as the service to add.

RTP / MPEG-4

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please see the online help.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in The I/O Terminal Connector, on page 42.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 8, or the online help.

Note that the LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

•Restart - The camera is restarted without changing any of the settings.

•Restore - The unit is restarted and most current settings are reset to factory default val- ues. The settings that will not be reset are as follows:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•Default - The default button should be used with caution. Pressing this will return all of the camera's settings to the factory default values (including the IP address)

Upgrade Server - See Upgrading the Firmware, on page 44.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If necessary, it will then be possible to return to the previous settings, if settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis 216FD Fixed Dome Network Camera User’s Manual About this Document Support Contents Axis 216FD Key features Product FeaturesOverview DC, this output has an open-collector NPN transistor with Terminal connectorLED indicators With a maximum load of 50mA and a maximum voltageAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the PasswordAdjustment Adjusting the imageLive View AMC audio controls Video Streams How to stream MPEG-4QuickTime & Real Player MPEG-4 clientsMotion Jpeg Axis Media Control AMCAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Image Appearance Video and Image settingsOverlay/Mask Text Overlay SettingsAdvanced Camera Settings Video StreamAdvanced MPEG-4 Settings GOV Settings Low Light BehaviorBit Rate Control Microphone Audio SettingsEnable Audio AudioAudio mode Audio ChannelsAudio Input Audio Output Layout Live View ConfigCustomizing the default Upload Own Web FilesOwn Home Output Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeAMC Settings Html ExamplesEvent Configuration Event ServersDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusReferrals System OptionsSecurity IP Address FilteringHttps Date & TimeServices Network Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings IP Address ConfigurationNAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressWAN internet Smtp email UPnPNetwork Traffic LED Settings MaintenancePorts & Devices Support ConfigurationResetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Terminal connectorPinout and Interface Terminal Connectors Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureBrowser Camera is accessible locally, but not externallyAre flashing red rapidly Power indicator is not constantly litCamera is inaccessible Decode only I framesNo audio Problems uploading filesAudio volume too low/high Is enabled under System Options Date & TimeLens Technical SpecificationsClock Approvals General performance considerationsOptimizing your system Bandwidth Frame rates Motion Jpeg and MPEG-4Compression See Image Compression Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 216FD Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network AMC IndexSnmp Axis 216FD Index
Related manuals
Manual 39 pages 20.76 Kb
Top Page Image Contents