Axis Communications 221 user manual Support, Configuration

Page 36

36AXIS 221 - System Options

Backup - To take a backup of all of the parameters, and any user-defined scripts, click the Backup button. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Support

The support overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.

Logs & Reports - when contacting Axis support, please be sure to provide a valid Server Report with your query.

View Information - The Log file, the Server Report and the Parameter List all provide valuable information for troubleshooting and when contacting Axis support.

Configuration

Log Level for Log Files - from the drop-down list, select the level of information to be added to the Log file

Log Level for Email - from the drop-down list, select the level of information to send as email and enter the destination email address.

Image 36

Contents Axis 221 Network Camera User’s Manual About this Document Contents Axis Product Features Overview Rear panelLED Indicators PowerNetwork StatusAccessing the Camera Access From a BrowserSetting the Password Accessing the camera from the InternetFocusing Live View Axis 221 Accessing the Camera Configuration Accessing the Setup toolsOverview of the Setup tools Basic ConfigurationSystem Options Administrators only Image Settings Video and ImageOverlay/Mask Settings Video StreamTest Overlay/Mask TypeAdvanced Settings Camera SettingsOverlay image/privacy mask requirements Image Formats Image SizeMPEG-4 Settings Profile@Level PropertiesAxis Media Control Live View Config Custom SettingsUpload Own Web Files Modify the Axis Look Own HomeExample Check Show Custom Link Action ButtonsDefault Video Format in Internet Explorer for Windows Axis Media Control Settings see Axis Media Control, onDefault Viewer for Motion Jpeg Html ExamplesSequence Mode External VideoEvent Configuration Event ServersDefinitions Configuring Event Types How to set up a triggered eventTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Scheduled EventMotion Detection Port Status Object SizeSystem Options SecurityIP Address Filter ViewerDate & Time HttpsNetwork Basic TCP/IP Settings Network Advanced TCP/IP SettingsIP Address Configuration ServicesHost Name Configuration Link-Local AddressNetwork Traffic Network Socks Network Smtp emailNetwork Snmp Network UPnPLED Settings MaintenancePorts & Devices Configuration SupportResetting to the Factory Default Settings Using the Reset ButtonAdvanced Troubleshooting Setup Basic ConfigurationChecking the Firmware Upgrading the FirmwareEmergency Recovery Procedure Axis SupportSymptoms, Possible Causes and Remedial Actions Default MPEG-4 decoder Status and Network indicator LEDs are flashing red rapidlyVideo/Image problems, general Lower frame rate than expected when viewing MPEG-4 Image degenerating when viewing MPEG-4Problems uploading files Poor quality snapshot imagesI/O Units Connectors Terminal ConnectorPinout and Interface Schematic Diagram Terminal Connectors Power Power Connector BlockPin Function D-Sub Connector Schematic Diagram Power Terminal Block and Power ConnectorsPin Replacing the Lens Removing and Attaching LensTechnical Specifications LensSpecification Dimensions HxWxD and weight MtbfGlossary of Terms Page Index AMCScheduled Event 25