ENFORCER Mini PTZ Camera
PARKING ACTION SETUP Menu
From MOTION SETUP
PARKING ACTION SETUP
|
| PARK ENABLE | OFF |
|
| ||
|
| WAIT TIME | 00:10:00 |
|
| PARK ACTION | HOME |
BACK |
| ||
EXIT |
|
This menu sets what the camera will do if it receives no PTZ command during a preset time.
| [ON / OFF] | |
PARK ENABLE | If set to ON, the camera runs an assigned | |
function automatically if there is no PTZ | ||
| ||
| command during the configured "WAIT TIME.” | |
| [1 minute to 4 hours] | |
| The time the PTZ camera waits before running | |
WAIT TIME | the assigned function can be set by the number of | |
| minutes. This time is displayed in the "hh:mm:ss" | |
| format | |
| [HOME / PRESET / PATTERN / SWING / | |
| GROUP] | |
| • HOME — Camera moves to the | |
| "HOME" position | |
| • PRESET — Camera moves to the specified | |
| "PRESET" position | |
PARK ACTION | • PATTERN — Camera performs the specified | |
| "PATTERN" action | |
| • GROUP — Camera performs the specified | |
| "GROUP" action | |
| Note: The PRESET, PATTERN, or GROUP | |
| option requires the input of which position | |
| or action is to be done. |
| 25 |