ENFORCER Mini PTZ Camera
GROUP SETUP Menu
From DOME CAMERA SETUP
GROUP SETUP
GROUP NO. 1
UNDEFINED
CLEAR GROUP CANCEL <EDIT GROUP>
Configures up to eight groups of motions, with each group consisting of any combination of up to 20 actions, including PRESETS, SWINGS, PATTERNS, and temporary halts in the action.
BACK
EXIT
EDIT GROUP 1
NO ACTION ### DWELL OPT
1NONE
2NONE
3NONE
4NONE
5NONE
SAVE
CANCEL [NEAR:EDIT]
EDIT GROUP 1
NO ACTION ### DWELL OPT
1NONE
2NONE
3NONE
4NONE
5NONE
SAVE | [NEAR:EDIT ACT] |
CANCEL | [FAR : EDIT :END] |
EDIT GROUP 1
NO ACTION ### DWELL OPT
1NONE
2NONE
3NONE
4NONE
5NONE
SAVE | [◄►:MOVE CURSOR] |
CANCEL | [▲▼:CHANGE VAL.] |
| [1 ~ 4] | |
| Selects which GROUP number to edit. If | |
GROUP NO | the selected GROUP number has not yet | |
been programmed, "UNDEFINED" will be | ||
| ||
| displayed under the selected GROUP | |
| number | |
| [CANCEL / OK] | |
CLR GROUP | Choose "OK" to delete the data in the | |
| selected GROUP | |
<EDIT GROUP> | Goes to the "EDIT GROUP" menu. See | |
below | ||
|
1.Press the NEAR key on the "NO" line to start the GROUP setup.
2.Use the joystick or arrow keys to move up and down to select the number of the ACTION to configure. There are a maximum of 20 ACTIONS which can be done in each GROUP.
3.Set the ACTION, DWELL time, and OPT (option) for each action. The item ready for configuring is displayed in reverse text. Move the joystick/arrow cursor right and left to select items to configure, and then move the joystick/arrow cursor up and down to change the value of the ACTION.
ACTION ### | [NONE / PRESET / SWING / PATTERN] |
DWELL | [0 seconds ~ 4 minutes] |
NOTE — DWELL configures how long the | |
| camera waits between each ACTION. |
| Option. If PRESET is selected as the |
| ACTION, this will be the PRESET speed. |
OPT | If PATTERN or SWING is selected as the |
| ACTION, set OPT for the number of times |
| the PATTERN or SWING is repeated. |
30 |
|