ENFORCER Mini PTZ Camera
SWING SETUP Menu
From DOME CAMERA SETUP
SWING SETUP |
|
| |||
|
| SWING NO. |
| 1 | |
|
|
| |||
|
| 1ST POS. |
| NOT USED | |
|
| 2ND POS. |
| NOT USED | |
|
| SWING SPEED | 30/SEC | ||
|
| CLEAR SWING | CANCEL | ||
BACK |
|
| |||
EXIT |
|
| |||
EDIT LABEL – PRESET 1 | |||||
SWING NO. | 1 |
| |||
1ST POS. | PRESET 5 | ||||
2ND POS. | NOT USED | ||||
|
|
|
| UNDEFINED | |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
This menu configures up to eight different swing motions back and forth
between two different PRESET positions.
When the SWING function operates, the camera moves (pans and tilts) to the PRESET position that was set as the "1ST POS." and then moves clockwise to the PRESET position set as "2ND POS." At that point, the camera moves counterclockwise back to the "1ST POS." It then repeats that motion back and forth between the two PRESET positions until another command is inputted.
| [1 ~ 8] | |
| Selects which SWING motion to edit. Choose 1 | |
SWING NO. | through 8. If a selected SWING motion has not | |
| been defined, "NOT USED" is displayed in the first | |
| and second positions for that motion | |
1ST POS. | [PRESET 1 ~ 94 or 96 ~ 128] | |
| [PRESET 1 ~ 94 or 96 ~ 128] | |
| Select the two PRESET positions between which | |
2ND POS. | the SWING motion will operate. NOTE | |
selected PRESET was not previously defined via | ||
| ||
| the OSD programming, "UNDEFINED" | |
| will be displayed. | |
SWING SPEED | Programs the speed at which the camera moves, | |
between the two PRESET positions. | ||
| ||
| [CANCEL / OK] | |
CLEAR SWING | Choose “OK” to delete the data in the selected | |
| SWING. |
28 |
|