ENFORCER Mini PTZ Camera
EDIT GROUP 1
NO ACTION ### DWELL OPT
1PRESET 1 00 : 03 : 360
2NONE
3NONE
4NONE
5NONE
SAVE | [◄►:MOVE CURSOR] |
CANCEL | [▲▼:CHANGE VAL.] |
EDIT GROUP 1
NO ACTION ### DWELL OPT 1 PRESET 1 00 : 03 : 360
2NONE
3NONE
4NONE
5NONE
SAVE | [NEAR:EDIT ACT] |
CANCEL | [FAR : EDIT :END] |
EDIT GROUP 1
NO ACTION ### DWELL OPT
1 PRESET 1 00 : 03 : 360
2 NONE
3NONE
4NONE
5NONE
SAVE
CANCEL
4.Configure each ACTION, ###, DWELL, and OPT.
In the sample screen on the left, ACTION #1 is the command for the PTZ camera to go to PRESET #1 using the PRESET speed of 360 as programmed in the PRESET SETUP menu (see page 26), and stay at that position for 3 seconds before moving to the next action.
5.After setting up an ACTION, use the NEAR key to move the cursor to the NO column, and then move the cursor up and down to select another ACTION to configure or modify.
6.After setting up all the ACTIONs for this GROUP, press the FAR key to exit. At this point, the cursor will move to SAVE. Press the NEAR key to save the data.
SYSTEM INITIALIZE Menu
From SPEED DOME CAMERA
SYSTEM INITIALIZE |
| ||
|
| CLEAR ALL DATA | NO |
|
| ||
|
| •CLR DISPLAY SET | NO |
|
| •CLR CAMERA SET | NO |
|
| •CLR MOTION SET | NO |
|
| •CLR EDIT DATA | NO |
|
| REBOOT CAMERA | NO |
|
| REBOOT SYSTEM | NO |
SAVE |
| ||
EXIT |
|
This menu lets the user clear selected programmed data, clear all programmed data, or reboot the entire camera or system.
|
| Deletes all | |
CLEAR ALL DATA | DISPLAY SETUP, CAMERA SETUP, and | ||
|
| MOTION SETUP. | |
• | CLR DISPLAY SET | Clears the DISPLAY SETUP data and initializes | |
the configuration of that data. | |||
|
| ||
• | CLR CAMERA SET | Clears the CAMERA SETUP data and initializes | |
the configuration of that data. | |||
|
| ||
• | CLR MOTION SET | Clears the MOTION SETUP data and initializes | |
the configuration of that data. | |||
|
| ||
|
| Deletes all PRESET SETUP data, SWING SETUP | |
• | CLR EDIT DATA | data, PATTERN SETUP data, and GROUP | |
|
| SETUP data. | |
REBOOT CAMERA | Reboots the zoom camera module. | ||
REBOOT SYSTEM | Reboots the entire PTZ camera. |
| 31 |