SVAT Electronics CLEARVU4 instruction manual Schedule Setup

SVAT ELECTRONICS

now you can see

6.5 Schedule Setup

Use this menu to set up a 24 hour recording schedule. Specify which hours to record when motion is detected, and when to record continuously or not at all.

The recording schedule is based on a 24 hour clock that goes from 0~24. Using the directional arrows, move the cursor to the hour of the day you would like to change, and adjust the letter to the one that represents the type of recording you would like. For example, if you want to record only when motion is detected at 12:00 PM, move the cursor to the 12, and use the arrows to change the letter to “M”. All types of recording are listed below along with their corresponding letter:

1.C: Continuous Recording

2.M: Motion Detect Record

3.A: Alarm Recording (advanced users only)

4.- : None (no recording will occur)

5.* : All (all types of recording are activated)

Record Mode Priority:

Manual Record>Alarm Record>Motion Detection Record>Continuous Record

CLEARVU4 16