SVAT ELECTRONICS
now you can see
Period: Duration time of the buzzer output.
Buzzer event includes the following:
1.KEY PRESSED: Disable/Enable beeping when keys are pressed.
2.MOTION DETECTION: Disable/Enable motion detect alarm
3.ALARM: Disable/enable motion sensor alarm.
4.VIDEO LOSS: Disable/enable video loss alarm
5.DISK FULL: Disable/enable disk full alarm.
6.8.3Relay Output (Advanced users)
The installation of any relay output alarm is optional and SVAT cannot offer technical support on such alarms. Contact the alarm sensor manufacturer for more information.
RELAY OUTPUT: A relay output can be connected to an external sounding device or warning device.
Two Types (NO/ NC) of Relay Output Setup:
ON: Relay output enabled.
OFF: Relay output disabled.
PERIOD: Duration time of the relay output.
Relay output event includes the following:
1.VIDEO LOSS: Triggered by video loss.
2.MOTION DETECTION: Triggered by motion detection.
3.ALARM: Triggered by external alarm.
CLEARVU4 | 21 |