SVAT ELECTRONICS
now you can see
3.1Camera Installation
1.Plug the 4 pin DIN female connection on the camera into the 4 PIN DIN male connection on the 60ft video/power wire.
2.Match the two arrows on top of both connecting cables.
3.Plug the camera’s power supply into the power jack located on the 60ft video/power wire.
4. Plug the camera’s power adapter into an AC outlet.
5. Connect the 60ft video/power wire’s male RCA plug to the VIDEO IN port of your TV/monitor/VCR/DVR.
6.If your VIDEO IN port is a BNC connection (common with DVR units), you will need to attach the BNC to RCA adapter before connecting the camera.
3.2Monitor Installation
1.Connect an RCA male wire (not included) to the VIDEO OUT Monitor port on the DVR.
Plug the other end of the RCA wire to the RCA VIDEO IN port on the TV/monitor.
2.For motion activated viewing (SPOT), connect an RCA male wire (not included) to the VIDEO OUT SPOT port on the DVR. Plug the other end of the RCA wire to the RCAVIDEO IN port on the TV/monitor. Note that the video will only be displayed when MOTION or ALARM recording is triggered.
3.2 Audio Installation
1.If you have an audio supported camera or microphone with an RCA Audio Out connection, you may connect it to the Audio In port on the DVR.
2.Connect an RCA audio wire (not included) to one of the Audio Out ports on the DVR.
3.Connect the other end to the Audio In port of your TV/monitor/speaker.
CLEARVU4 | 3 |