Basic Operation continued

Buttons continued

Use the MUTE/TEST button to do two things:

SILENCE ALARM: Your UPS has three alarms. The first, the INVERT alarm, emits four short beeps every ten seconds when the UPS is in INVERT mode, to warn you that AC power has failed. The second, the OVERLOAD alarm, emits short, rapid beeps when the UPS is in INVERT mode if the total power draw of connected equipment exceeds the UPS’s output capacity to warn you to reduce the load. The third, the Low Battery alarm, emits a constant beep when the UPS is in INVERT mode and its batteries are very nearly depleted, to warn you that connected equipment must shut down. To silence the INVERT or OVERLOAD alarms, press the MUTE/TEST button. The LOW BATTERY alarm will only stop when the UPS switches to the OFF or ON mode.

SELF-TEST BATTERIES AND ALARMS: If your UPS is in the ON mode and has a load connected, you may test its batteries by pressing the MUTE/TEST button for two seconds. The UPS will switch to INVERT mode for several seconds. Normally, the INVERT alarm (four short beeps) will sound, indicating that the system is working properly. If the OVERLOAD alarm (short, rapid beeps) sounds, reduce the load on the UPS. If the LOW BATTERY alarm (a constant beep) sounds, your UPS’s batteries may need replacing or the batteries may simply be less than fully charged. Let the UPS charge for twelve hours, then perform a second self-test. If the LOW BATTERY alarm sounds again, contact Tripp Lite for service. It is likely your UPS requires a battery replacement. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

Indicator Lights

LINE POWER: This green light will turn ON whenever your UPS is receiving normal AC line power. It will flash while the UPS is in CHARGE ONLY mode to indicate that the UPS will not provide battery backup during a blackout or brownout.

BATTERY POWER: This yellow light will turn ON when your UPS is providing your equipment with battery power.

BATTERY CHARGE: This red light will turn ON continuously after the UPS runs a self-test to indicate that the UPS’s battery is weakly charged. If it remains lit after you have allowed the UPS to charge for twelve hours and run a second self-test, contact Tripp Lite for service. It is likely your UPS requires a battery replacement. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

6

Page 5 Page 7
Page 6
Image 6
Tripp Lite OM500RMX owner manual Indicator Lights
Page 5 Page 7

OM500RMX specifications

The Tripp Lite OM500RMX is a high-performance, versatile rackmount power distribution unit designed to deliver reliable power management for server rooms, data centers, and IT installations. Known for its efficiency and robust features, the OM500RMX is particularly favored by IT professionals who demand quality and durability in their power solutions.

One of the main features of the Tripp Lite OM500RMX is its capability to distribute 5000 watts of power across multiple devices, making it well-suited for high-density applications. The unit includes ten NEMA outlets, allowing users to connect a variety of equipment, from servers to networking gear, while ensuring consistent and reliable power delivery.

The OM500RMX employs advanced surge protection technology, featuring a built-in surge suppressor that shields connected devices from voltage spikes caused by electrical surges and transients. This is essential for keeping sensitive equipment safe from damage and ensuring uninterrupted operations.

Another notable characteristic is its rackmount design. The OM500RMX is designed to fit seamlessly into 19-inch racks, a standard in the IT industry, which allows for efficient use of space and better organization within server cabinets. It typically has a 1U height, making it a compact solution for power management needs.

To enhance user experience, the Tripp Lite OM500RMX also comes with a digital display that provides real-time monitoring of power conditions. This feature enables users to track voltage, current, and power consumption, allowing for proactive management of power resources and preventing potential issues before they escalate.

Additionally, the unit is equipped with a 10 ft. power cord, facilitating flexible installation options and enabling it to reach distant power sources. The cord’s heavy-duty construction ensures durability and reliability, essential for high-demand environments.

The OM500RMX incorporates an advanced thermal management system that includes internal fans to maintain optimal operating temperatures. This helps ensure that the equipment remains cool during prolonged use, increasing operational efficiency and longevity.

In conclusion, the Tripp Lite OM500RMX is a robust and reliable power distribution unit that combines flexibility and safety for demanding IT environments. With its high wattage capacity, advanced surge protection, compact design, and real-time monitoring capabilities, it stands out as an essential tool for anyone looking to manage power distribution effectively within their IT infrastructure.
Top Page Image Contents