Error Codes
This section lists the error codes that may appear when using ICL.
10100 | C101_ICL_UNKNOWN_ERROR | ICL OPTION LIBRARY: unknown error |
10101 | C101_ICL_LIB_NOT_INIT | the script library not initialized |
10102 | C101_ICL_LIB_INITED | the script library initialized |
10103 | C101_ICL_NO_BEGIN | script_begin command was not seen |
10104 | C101_ICL_END_TOO_SOON | text ended before script_end instruction |
10105 | C101_ICL_INST_INVAL | script instruction not correctly read |
10106 | C101_ICL_OPEN_PAREN | opening parenthesis not present |
10107 | C101_ICL_ILLEGAL_CHAR | illegal character or symbol |
10108 | C101_ICL_BAD_COMMA | unexpected comma |
10109 | C101_ICL_BAD_NUMBER | unexpected numeric parameter; comma needed? |
10110 | C101_ICL_BAD_CL_PAREN | unexpected closing parenthesis; extra comma? |
10111 | C101_ICL_NO_SEMICOLON | semicolon missing from this instruction |
10112 | C101_ICL_TOO_MANY_ARG | instruction has too many parameters |
10113 | C101_ICL_TOO_FEW_ARG | instruction doesn’t have enough parameters |
10114 | C101_ICL_ARG_IS_ZERO | argument must be greater than zero |
10115 | C101_ICL_ARG_OVER_65K | argument must be 65,535 or less |
10116 | C101_ICL_ARG_INVALID | argument is invalid or illegal |
10117 | C101_ICL_OVER_LOOP | loops are nested too deeply |
10118 | C101_ICL_UNDER_LOOP | too many loop_end instructions |
10119 | C101_ICL_UNEVEN_LOOP | loop_begin commands don’t match loop_end |
10120 | C101_ICL_BIN_TOO_LARG | readout’s binning exceeds its size |
10121 | C101_ICL_RGN_TOO_LARG | readout region does not fit on the CCD |
10122 | C101_ICL_DISPLAY_SMAL | displayed data is less than the collected data |
10123 | C101_ICL_DISPLAY_LARG | displayed data is more than the collected data |
10124 | C101_ICL_NO_FRAME_XFR | camera doesn’t have a separate storage array |
10125 | C101_ICL_NO_MPP | camera does not allow MPP mode |
10126 | C101_ICL_TOO_COMPLEX | script exceeds available program memory |
20Advanced Camera Operation Manual