Fluke 1520
Users Manual
Measuring Resistance
1.Connect the probes to the circuit to be measured.
Measure voltage first to ensure that no hazardous voltage is present, then switch to Ohms.
2.If the resistance is approximately 30 Ω or less, the Meter
beeps. To turn off the beeper, press the beeper button. If the resistance is higher than 4000 Ω, >4000 Ω is displayed.
acf07f.eps
Measuring Voltage
1.Connect the probes to the circuit to be measured.
2.If the voltage is higher Wthan 660 V, >660 V is displayed.
Warning
The Meter indicates either ac or dc voltage. If the voltage being measured has both an ac and dc component, the Meter displays only the largest component of the measured signal.
acf08f.eps
18