Fluke 1526 user manual Fluke

Page 27

Fluke 1520

Users Manual

4.Place the Meter face down on a nonabrasive surface and loosen the two screws with a flat-blade screwdriver.

5.Lift the battery access lid away from the Meter.

6.Replace the C cells as shown in Figure 5. Observe the battery polarity shown in the battery compartment.

7.Secure the battery access lid back in position with the two screws.

22

Image 27

Contents 1520 Page Table of Contents Page List of Tables Unpacking the Meter FlukeFluke VDE Safety Information and SymbolsFluke MegOhmMeter Key functions Key and Switch Descriptions Rotary switchResistance Beeper function Low Resistance functionBacklight button Display Description DisplayDisplay Connecting to the Circuit Under Test Using the MeterConnecting to the Circuit Under Test Measuring Insulation Resistance W Auto-Shut-OffDisplay shows - - until the Test button is pushed Fluke Using the Lock Function to Measure Insulation Resistance Measuring Low Resistance Using the Lock Function to Measure Resistance Measuring Voltage Measuring ResistanceDisplay Example Checking the BatteryMaintaining the Meter CleaningAppears Replacing and Disposing of the BatteriesWFluke Replacing the Batteries Testing the Fuse Testing and Replacing the Fuse WReplacing the Fuse Replacing the Fuse Part Number Replacement Parts and Optional AccessoriesReplacement Part Optional AccessoriesPrinciple of Measurement for Resistance Service CentersEnvironmental SpecificationsMechanical Specifications Safety SpecificationsElectromagnetic Compatibility EMC Insulation Resistance Electrical SpecificationsLo Ω Resistance VoltageLimited Warranty & Limitation of Liability Netherlands Fluke