Fluke 1520
Users Manual
WSafety Information
Use of instrument in a manner not specified by the manufacturer may impair safety features/protection provided by the equipment. Read the following safety information carefully before using or servicing the instrument. To avoid electric shock or fire, do the following:
∙Avoid working alone.
∙Inspect the test leads for damaged insulation or exposed metal. Check test lead continuity. Damaged leads must be replaced. Do not use the Meter if it looks damaged.
∙Be careful when working above 30 V ac rms, 42 V ac peak and 60 V dc. Such voltages pose a shock hazard.
∙When using the probes, keep your fingers away from probe contacts. Keep your fingers behind the finger guards on the probes.
∙Measurements can be adversely affected by impedances of additional operating circuits connected in parallel or by transient currents.
∙Verify operation prior to measuring hazardous voltages (voltages above 30 V ac rms, 42 V ac peak and 60 V dc).
4