Hawking Technology HNC300, HNC320G manual Tcp/Ip

Page 28

Network

Click on Network to the right of the text “Internet Camera” to configure the LAN settings for your camera.

TCP/IP:

ξIP Address Mode: This field provides you with three options. They are as follows:

Fixed IP You can select this option and enter the IP address directly. The default settings are:

ξIP Address – 192.168.0.20

ξSubnet Mask – 255.255.255.0

ξDefault Gateway – 0.0.0.0

Dynamic Address (DHCP) If your network uses a DHCP server, you may select this option. According to this setting, the camera will automatically be assigned an IP address from the DHCP server. Once you click “Save” at the bottom of the page, wait for the camera to reboot (this could take up to one minute). After the camera has finished rebooting, you can locate the camera’s new IP address via the camera’s Setup Wizard utility. The new IP address should appear under the “Current IP Address” heading in the utility. (If you have multiple cameras on the network, you may need to test the newly assigned IP addresses to locate the camera you have just configured.)

PLEASE NOTE: If you want to be certain of your camera’s IP address at all times, “Fixed IP” is the preferred option.

28

Image 28
Contents Page Trademarks & Copyright Hawking Limited Warranty Power LED Link LED System Administration HNC300 Page Page HNC300 & HNC320G Network IPView SE ApplicationWeb Configuration Simple to UseSupports a Variety of Platforms Remote UtilityPower LED HNC300Front Panel Link LEDNetwork Cable Connector DC Power ConnectorReset Button Rear PanelScrew Hole Top PanelBottom Panel Link LED Power LED Antenna Connector Screw Hole Connecting the HNC300/HNC320G to the Camera Stand Unpack and InspectAttach the External Power Supply HNC300 Connect an Ethernet CableAttach Wireless Antenna Attach the External Power Supply Page Main Menu System Administration System Administration ManagementSystem Network System Administration Configuration OFF Video TCP/IP Save/Cancel User Access Control DateTime Upload Page Page System Administration Tools FTP Server TestReset Backup System Administration Help System Administration Management Wireless Network System Administration Configuration OFF Video Wireless Interface WEP Encryption Ascii input formatPage TCP/IP Save/Cancel User Access Control DateTime Upload Page Page System Administration Tools Reset Backup System Administration Help View Image ActiveX Mode View Image Java Mode Applications Home ApplicationsSoho Small Office, Home Office Applications Installation Page Page Page Page IPView SE Control Panel Combine Combines all display windows into one windowHow to Add a Camera Add CameraPage Page How to Change Cameras How to Connect/Disconnect the Image How to Delete a Camera How to Adjust the Property Setting Extra InformationPage Page Update Firmware How to Adjust the Recording Settings Frequently Asked Questions Regarding Camera FeaturesHNC300/HNC320G Installation For the HNC320G onlyTroubleshooting Ping Your IP AddressPage Upgrade Firmware Time Zone Table Installation To Web Server Xplug Control InstallationImportant Information Installation To Local PC Page Adjusting the Camera Focus HNC300 Browser Support Operating EnvironmentVideo specification HNC320GEMI How to View Your Camera via the Internet Page Save/Cancel Page Page Glossary of Terms NumbersDhcp HEX Java Smtp UDP