G. Adjusting the Camera Focus
The HNC300/HNC320G features an exchangeable
To adjust the focus of the lens, you need to turn the lens slowly in either the clockwise or counterclockwise direction until the desired image quality is reached. Do not over turn the lens in either of the directions, as it will be out of focus. Unless you wish to replace the lens, do not unscrew the lens more than 1.0mm apart from the Fixed Lens Assembly.
Note:
You can further adjust the network camera’s image quality via the Web Configuration under System Administration - Image. Please refer to the Web Configuration section for further details.
Warning: Direct exposure to sunlight may cause permanent damage to the network camera’s CMOS sensor. Therefore, do not expose the network camera’s lens directly to sunlight. When operation is required in an environment with glaring or excessively bright light, it is recommended to use an iris lens. The network camera is designed for indoor usage and if your application requires prolonged exposure to sunlight, a sun visor is recommended to protect the camera.
88