Parameters
bEnable
If TRUE, the aiming mechanism is turned on; otherwise the aiming mechanism is turned off.
oemConnect
The application should call this function before any other API functions. Once an application has connected to the engine, all other API functions can be successfully called. The application does not need to
Result_t oemConnect ( )
Return Values
RESULT_SUCCESS
RESULT_ERR_DRIVER
Parameters
All Reserved, should be NULL
oemDefaultSymbology
This function sets the specified symbologies to their factory default configurations. See the individual setup functions to determine the factory default setting for a particular symbology.
Result_t oemDefaultSymbology (
BOOL *pSymbology,
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
pSymbology
Points to an array of symbologies you want to default. For example, if a value is set to 1 (i.e., pSymbology [SYM_AZTEC]=1), then Aztec symbology is defaulted.
Note: The array must be of size MAX_SYMBOLOGIES (Defined in Oemdecodece.h). You must initialize the entire array before calling this function.
oemDisableSymbology
This function disables specified symbologies from decoding.
Result_t oemDisableSymbology (
BOOL *pSymbology
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
pSymbology
Points to an array of symbologies you want to disable. For example, if a value is set to 1 (i.e., pSymbology [SYM_AZTEC]=1), then Aztec decoding is disabled.
Note: The array must be of size MAX_SYMBOLOGIES (Defined in Oemdecodece.h). You must initialize the entire array before calling this function.
2 - 2 | IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide |