oemSetupPosiCode
This function is used to set the PosiCode
Result_t oemSetupPosiCode (
WORD nMinLength, WORD nMaxLength, WORD nLimited
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
nMinLength
The minimum length decoded PosiCode message the engine should return. PosiCode messages smaller than this minimum length are not reported by the engine. The minimum allowable value (as well as the default) is 4.
nMaxLength
The maximum length decoded PosiCode message the engine should return. PosiCode messages larger than this maximum length are reported by the engine. The maximum allowable value (as well as the default) is 48.
nLimited
A WORD variable used to enable the decoding of either Posicode Limited A or Posicode Limited B labels. A value of 1 enables Posicode Limited A, and a value of 2 enables Posicode Limited B. A value of 0 disables decoding of both Limited A and Limited B. The default value is 0.
oemSetupPostnet
This function is used to set the Postnet
Result_t oemSetupPostnet (
BOOL bXmitCheckChar
)
Return Values
RESULT_SUCCESS
Parameters
bXmitCheckChar
Points to a BOOL variable that determines if the engine will return the check character as part of the data string after a successful decode. If TRUE, the engine returns the check character. If FALSE, the check character is not returned. The default value is FALSE.
oemSetupQR
This function is used to set the QR Code
Result_t oemSetupQR (
WORD nMinLength, WORD nMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide | 2 - 61 |