oemSetDecodeMode
This function sets the decoding mode of the engine.
Result_t oemSetDecodeMode (
SetupType_t SetupType,
WORD nMode
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
RESULT_ERR_UNSUPPORTED
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
pnMode
Points to a WORD variable that contains the desired decode mode: 1 = Standard
2 = Advanced Linear
4 = Quick Omni
oemSetExposureMode
This function is used to select the exposure mode to be used during image acquisition.
Result_t oemSetExposureMode (
ExposureMode_t ExposureMode
)
Return Values
RESULT_SUCCESS
RESULT_ERR_UNSUPPORTED
RESULT_ERR_DRIVER
RESULT_ERR_PARAMETER
Parameters
ExposureMode
The exposure modes that may be used are: fixed, on chip or Hand Held Products.
oemSetExposureSettings
This function is used to set various image parameters that are used during image acquisition.
Result_t oemSetExposureSettings (
ExposureSettings_t *pExpsoureSettings
)
Return Values
RESULT_SUCCESS
RESULT_ERR_UNSUPPORTED
RESULT_ERR_DRIVER
Parameters
pExposureSettings
A pointer to an exposure settings structure. See the definition of the ExposureSettings_t struct in oemdecodece.h for details.
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide | 2 - 45 |