oemSetSearchTimeLimit
This function is used to set the maximum time limit for the decoders search processing. The limit, specified in milliseconds, is the maximum amount of time the search process may use to look for potential labels in the current image.
Result_t oemSetSearchTimeLimit (
SetupType_t SetupType, WORD nLimit
)
Return Values
RESULT_SUCCESS
RESULT_ERR_UNSUPPORTED
RESULT_ERR_PARAMETER
Parameters
SetupType
SETUP_TYPE_CURRENT for current settings, or SETUP_TYPE_DEFAULT for default settings.
nLimit
The maximum amount of time the decoder search processing may use to find a potential label in the current image. Valid range for nLimit is
oemSetupAztec
This function is used to set the Aztec and Aztec Mesa Code
Result_t oemSetupAztec (
WORD nMinLength, WORD nMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
Parameters
nMinLength
The minimum length decoded Aztec or Aztec Mesa Code message the engine should return. Aztec or Aztec Mesa Code messages smaller than this minimum length are not reported by the engine. The minimum allowable value (as well as the default) is 1.
nMaxLength
The maximum length decoded Aztec or Aztec Mesa Code message the engine should return. Aztec or Aztec Mesa Codes messages larger than this maximum length are reported by the engine. The maximum allowable value (as well as the default) is 3750.
oemSetupChinaPost
This function is used to set the China Post
Result_t oemSetupChinaPost (
WORD nMinLength, WORD nMaxLength
)
Return Values
RESULT_SUCCESS
RESULT_ERR_PARAMETER
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide | 2 - 47 |