![](/images/new-backgrounds/1292120/29212051x1.webp)
Recording
Manual Recording
Manual Recording allows you to manually start/stop recording from one channel at a time. You cannot record while in Quad mode.
You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 43.
NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual Recording.
REC
Cam1
2009 07 17 16:32:05
Figure 7.0 Recording indicated by the OSD
To enable Manual Recording:
1.Select a channel (1~4) on the wireless receiver or from the remote control.
2.Press the Record— button on the remote control or
3.To stop Manual Recording, press the Record— button on the remote control or
When Should I Use Manual Recording?
• Emergency recording
• Low traffic environments
22