LOREX Technology LW2301 instruction manual Start and Stop Times for Schedule Recording

Page 27

Recording

Schedule Recording

Use Schedule Recording to have the system automatically record continuously from a selected camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a Recording Schedule in the main menu in order to use Schedule Recording.

NOTE: Please ensure you have set the date and time on the receiver prior to setting a recording schedule.

NOTE: Auto Sequence Viewing Mode is available during Schedule Recording. However, the system will record video of the sequence itself. Therefore, you cannot playback video of individual cameras.

Figure 7.1 Start and Stop Times for Schedule Recording

To set a recording schedule:

1.Press the MENU button to open the Main Menu.

2.Select Record and press the Enter/OK button.

3.Press RIGHT/LEFT to move the cursor (yellow); press UP/DOWN to change the hour and the minutes.

NOTE: You need to press RIGHT to move the cursor from Start Time to Stop Time.

4.Press the Enter/OK button to save your schedule.

5.Press MENU until all menu windows are closed.

NOTE: You cannot enable Schedule Recording if the system is in Quad Mode.

23

Image 27
Contents Digital Wireless Quad Surveillance System Important Safeguards Before YOU Start Avant DE Commencer Need HELP? Necesita Ayuda Installation Important SafeguardsUse ServiceFCC Notice General PrecautionsTechnology FeaturesTable of Contents Getting Started Wireless AntennaTop Panel Wireless ReceiverRight Panel Left PanelCamera Remote Control Remote ControlInstallation Warnings Installing the CameraConnect the power adapter, and AV cable Connecting the Wireless ReceiverLED indicators on wireless receiver LED Indicators on the Wireless ReceiverOn-Screen Display Using the SystemOn-Screen Display cont’d Recording Indicator The red REC iconViewing Modes View Mode diagramRecording Tip Quad Mode2009/07/07 133542 Setting the TimeRecording Recording Mode SummaryManual Recording When Should I Use Manual Recording?Start and Stop Times for Schedule Recording Schedule RecordingStopping Schedule Recording When Should I Use Schedule Recording?REC Motion RecordingRecording Tip When Should I Use Motion Recording?Viewing Recorded Video Viewing Video Using the System3MB Controlling Playback Playback buttons on the remote control and wireless receiverMac Viewing Video Directly From the SD CardMain Menu Using the Main MenuCamera On/Off Camera 1 On Camera 2 Off Camera 3 Off Camera 4 OffRecord menu RecordVGA or QVGA? QualityTrigger Record menu Trigger RecordRecording Schedule Schedule RecordOverwrite Overwrite enable/disableWhat is Pairing? PairingPlease Press Pair Key on Camera side Settings menu SettingsDate & Time AV out menu AV OutZoom menu ZoomBrightness menu BrightnessFormat menu FormatDefault menu DefaultReceiver Appendix a System SpecificationsGeneral CameraAppendix B About Digital Wireless Technology Press Pair on the back of the camera Appendix C Adding CamerasObstacles Appendix D Strengthening the Range of the Wireless SignalExtending Your Wireless Signal Clear Line-of-SightGHZ Omni-Directional Wireless Antenna GHZ Directional Wireless Panel AntennaAppendix E Deleting Video Files on the System 0920032 5MBSD Card Standing Recording Time Capacity Qvga VGA Appendix F Estimated Recording Times on SD CardsPower Failure icon Appendix G Power FailureProblem Solution TroubleshootingFAQ Revision Composez LA Ligne D’ASSISTANCE Sans Frais AUS Conommateurs Page See Hear Protect