LOREX Technology LW2301 Stopping Schedule Recording, When Should I Use Schedule Recording?

Recording

To enable schedule recording:

1.Disable ALL RECORDING on the system:

•If the system is in Manual Recording, press the Record— button on the remote control or the RECORD—M button on the wireless receiver so the blue LED does NOT appear on the wireless receiver

•If the system is in Motion Recording, press the RECORD—A/Motion button so the blue LED does NOT appear on the wireless receiver

ATTENTION: Manual Recording, Motion Recording, and Quad Mode will override Schedule Recording. If you wish to use Schedule Recording, you must ensure Manual Recording, Motion Recording, and Quad Mode are disabled.

2.Select a channel (1~4) on the wireless receiver or from the remote control

OR

Press the CHANNEL—A button to enable Auto Sequence Viewing Mode.

When the Start Time arrives, recording begins. The “REC” indicator appears on-screen.

NOTE: You cannot use Quad Mode with Schedule Recording.

Figure 7.2 Schedule Recording on the receiver – no blue LEDs should be lit up beneath Manual Recording (M) and Motion Recording (A)

Stopping Schedule Recording

When the Stop Time arrives, the system stops recording. However, if necessary, you can also stop Schedule Recording manually.

To stop Schedule Recording:

ƒPress Record— button on the remote control or the RECORD—M button on the wireless receiver to stop schedule recording

NOTE: If you stop Schedule Recording, you cannot resume Schedule Recording. You will need to enter new Start and Stop times in the Schedule Record menu.

When Should I Use Schedule Recording?

•It is recommended to use Schedule Recording for capturing a sensitive or important target that needs to be recorded daily, i.e. a cash register, safe, shipping & receiving docks, etc.

•During the day in high traffic environments

24