LaCie d2 Quadra • Design by Neil Poulton | Getting Connected |
User Manual | page 13 |
|
|
2.1. Turning the Drive On
To connect the power supply:
The power supply kit is composed of two cables: one cable (A) connects to the LaCie drive; and the other cable (B) connects to a power outlet, such as a wall outlet or a surge protector.
1.Connect Cable A to your LaCie hard disk.
2.Connect Cable B to the power supply brick (C).
3.Connect Cable B to a surge protector or wall outlet.
4.Turn on the drive by moving the power switch on the back of the drive to the on or auto position.
CAUTION: Only use the AC adapter supplied with your spe- |
| ||
cific LaCie hard disk. Do not use a power supply from another |
| ||
LaCie hard disk or another manufacturer. Using any other pow- |
| ||
er cable or power supply may cause damage to the device and |
| ||
void your warranty. |
| ||
Always remove the AC adapter before transporting your LaCie |
| ||
hard disk. Failure to remove the adapter may result in damage |
| ||
to your drive and will void your warranty. |
| ||
|
|
| |
|
|
| |
Technical note: You may use your LaCie hard disk when |
| ||
A | |||
in a foreign country thanks to its | |||
| |||
To be able to use this feature, you may need to purchase an |
| ||
appropriate adapter or cord. LaCie accepts no responsibility |
| ||
for any damage to the drive resulting from the use of an inap- |
| ||
propriate adapter. Using an adapter other than one authorized |
| ||
by LaCie will void your warranty. |
| ||
|
|
| |
B
C