Vivotek PZ7151, PZ7152 manual

Page 57

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

HTTP: Select to send the media to a HTTP server when a trigger is activated.

■URL: Enter the URL of the HTTP server.

■User name: Enter the user name.

■Password: Enter the password.

To verify if the HTTP settings are correctly conﬁgured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt ﬁle on the HTTP server.

Network storage: Select to send the media to a network storage when a trigger is activated.

■Network storage location: Enter the path of the network storage.

■Workgroup: Enter the workgroup for network storage.

■User name: Enter the user name.

■Password: Enter the password.

To verify if the network storage settings are correctly conﬁgured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt ﬁle on the network storage server.

When completed, click Save to take effect and then click Close to quit this page. The new server name will appear in the server drop-down list on the application page as below. To remove a server setting from the list, select a server name from the drop-down list and then click Delete. Note that only when the server setting is not being applied to an event setting can it be deleted.

User's Manual - 57

Image 57

Contents Page Table of Contents Read before use Package contentsRear panel Physical descriptionDI/DO Diagram Hardware Reset Hardware installation InstallationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP When using a PoE-enabled switch ADSL/Cable/Hub Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Host Name Mjpeg protocol and media options Page Client Settings MP4 Saving Options System SystemSystem Time DI and do Security Root PasswordAdd User Manage UserCreate and Install Certiﬁcate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Wireless LAN PZ7152 only Page Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Audio and video Video settingsGate 160945 2008/04/09 Page Page Audio settings Motion detection Percentage = 30% Preset Position Camera controlDwelling time sec Patrol selection Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Conﬁguration File CalibrateUpgrade Firmware Page URL Commands of the Network Camera OverviewStyle convention Security level General CGI URL syntax and parametersGet server parameter values Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group dii0~ndi-1 Group doi0~ndo-1 Group securitySubgroup of network http Subgroup of network https Subgroup of network rtspSubgroup of network pppoe Group ipfilter Group wirelessPage Quality and 5 is the best quality Group audioinc0~ n-1for n channel products Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentationPage Page Group eventi0~2 Group serveri0~4 Group recordi0~1 Group mediai0~4Drive the digital output Query status of the digital output Query status of the digital inputAccount management Capture single snapshotUpgrade ﬁrmware System logsMethod Post Post data Camera ControlRecall System InformationMethod GET IP ﬁltering Preset LocationsOpen the network streamings Get SDP of StreamingsTechnical Speciﬁcations Power LED IndicatorInstallation, Management, and Maintenance ApprovalsTechnology License Notice Electromagnetic Compatibility EMC