Vivotek PZ7151, PZ7152 manual Internet connection with static IP

Page 9

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

2.In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router.

■HTTP port

■RTSP port

■RTP port for audio

■RTCP port for audio

■RTP port for video

■RTCP port for video

If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to the user’s manual of your router.

3.Find out the public IP address of your router provided by your ISP (Internet Service Provider). Use the public IP and the secondary HTTP port to access the Network Camera from the Internet. Please refer to Network Type on page 30 for details.

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera and follow the steps below.

1.Set up the Network Camera in a LAN. Please refer to Software installation on page 12 for details.

2.Go to Conﬁguration > Network > Network Type. Select LAN > Use ﬁxed IP address.

3.Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 31 for details.

User's Manual - 9

Image 9

Contents Page Table of Contents Read before use Package contentsRear panel Physical descriptionDI/DO Diagram Hardware Reset Hardware installation InstallationNetwork deployment Setup the Network Camera over the InternetInternet connection with static IP When using a PoE-enabled switch ADSL/Cable/Hub Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Host Name Mjpeg protocol and media options Page Client Settings MP4 Saving Options System SystemSystem Time DI and do Security Root PasswordAdd User Manage UserCreate and Install Certiﬁcate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Wireless LAN PZ7152 only Page Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Audio and video Video settingsGate 160945 2008/04/09 Page Page Audio settings Motion detection Percentage = 30% Preset Position Camera controlDwelling time sec Patrol selection Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Conﬁguration File CalibrateUpgrade Firmware Page URL Commands of the Network Camera OverviewStyle convention Security level General CGI URL syntax and parametersGet server parameter values Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group dii0~ndi-1 Group doi0~ndo-1 Group securitySubgroup of network http Subgroup of network https Subgroup of network rtspSubgroup of network pppoe Group ipfilter Group wirelessPage Quality and 5 is the best quality Group audioinc0~ n-1for n channel products Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentationPage Page Group eventi0~2 Group serveri0~4 Group recordi0~1 Group mediai0~4Drive the digital output Query status of the digital output Query status of the digital inputAccount management Capture single snapshotUpgrade ﬁrmware System logsMethod Post Post data Camera ControlRecall System InformationMethod GET IP ﬁltering Preset LocationsOpen the network streamings Get SDP of StreamingsTechnical Speciﬁcations Power LED IndicatorInstallation, Management, and Maintenance ApprovalsTechnology License Notice Electromagnetic Compatibility EMC