Vivotek PZ7112 manual Vivotek

Page 42

VIVOTEK

RTSP port /RTP port for video, audio/ RTCP port for video, audio

■RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

■The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

■The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even number and the RTCP port is the RTP port number plus one, and thus is always odd. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

Multicast settings for stream 1 / Multicast settings for stream 2: Click the items to display the detailed configuration information. Select the Always multicast option to enable multicast for stream 1 or stream 2.

Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address. Therefore, enabling multicast can effectively save Internet bandwith.

The ports can be changed to values between 1025 and 65535. The multicast RTP port must be an even number and the multicast RTCP port number is the multicast RTP port number plus one, and is thus always odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.

If the multicast RTP video ports are incorrectly assigned, the following warning message will be displayed:

Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a packet can be forwarded.

42 - User's Manual

Image 42

Contents IP Surveillance Table of Contents Package Contents Read Before UsePhysical Description Rear panelDI/DO Diagram Hardware Reset Installation Hardware InstallationSetup the Network Camera over the Internet Network DeploymentInternet connection with static IP When using a PoE-enabled switch Software Installation Accessing the Network Camera Using Web BrowsersVivotek Using Rtsp Players Using 3GPP-compatible Mobile Devices MPEG-4Using Vivotek Recording Software Main Configuration Area Vivotek Video Control Buttons Drop-down List of Preset Positions Client Settings MP4 Saving Options Configuration System SystemSystem Time DI and doManage Privilege Root PasswordSecurity Manage UserEnable Https Create and Install Certificate MethodHttps Hypertext Transfer Protocol over SSL Https Create self-signed certificate manually Vivotek Vivotek Network Network TypePPPoE Point-to-point over Ethernet Steps to enable the UPnPTM user interface on your computer Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Http Https Two way audioFTP Rtsp Streaming Vivotek Wireless LAN PZ7112/PZ7122 only Vivotek Vivotek Ddns Dynamic domain name service DdnsCustomSafe100 Access List General SettingsFilter Administrator IP address IP address 192.168.2.x will be bolckedVideo Settings Audio and VideoImage Settings CCD Adjustment Advanced Mode Video quality settings for stream 1 / stream 2 Advanced Mode Ntsc Audio Settings Follow the steps below to enable motion detection Motion DetectionPercentage = 30% Preset Locations Camera ControlPatrol Settings Digital Zoom Zoom Times DisplayReturn to Home Position while Idle Homepage Layout PreviewLogo Theme Options Vivotek Application Customized ScriptEvent Settings Trigger Event Schedule Vivotek Vivotek Server Settings Server TypeVivotek Vivotek Media Settings Media TypeTrigger Activation Format is Yyyymmdd Click to open the directory Format is HH 24r Recording Settings RecordingRecording Settings 20081120 20081121 20081122 System Log Remote LogCurrent Log View Parameters Restore MaintenanceReboot CalibrateExport / Upload Files Upgrade Firmware Reboot system now This connection will close URL Commands for the Network Camera AppendixGeneral CGI URL Syntax and Parameters Security LevelGet Server Parameter Values Set Server Parameter Values Parameter pairGroupname Available parameters on the server Valid Values DescriptionName Value Edinburgh, Lisbon, London Name Value Security Description Get/set Normalstate High Name Subgroup of network http Subgroup of network sip OPEN, Shared Denyi0~9end 0.0 ~ Denied ending IPv4 address for connection Qcif Name Value Security TZO Logemerg Font color Themecolorconfigfont Bit 8 = Invalidate bit 1 ~ Bit 2 = External or built-in zoom function 0built-in Audioextmic Boolean Parameter Value Enable or disable trigger digital output Enable or disable this server action Group mediai0~4 mediafreespace is used internally Bit0 LSB = serveri0 Drive the digital output Query Status of the Digital Input Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\nQuery Status of the Digital Output Capture Single SnapshotAccount Management QualityUpgrade Firmware System LogsCamera Control Preset Locations RecallSystem Information Http//servername/cgi-bin/sysinfo.cgiIP Filtering Get SDP of StreamsOpen the Network Stream Technical Specifications ．PZ7112 Ntsc CCD, WlanTechnology License Notice Electromagnetic Compatibility EMC Liability

Related manuals

Manual 118 pages 11.39 Kb