Vivotek PZ7112 manual CCD Adjustment Advanced Mode

Page 53

VIVOTEK

■Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

■Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

■Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the setting and click Close to exit the page.

CCD Adjustment Advanced Mode

Click CCD settings to open the CCD Adjustment page. On this page, you can set the Auto electronic shutter (AES), Auto tracking white balance, White balance control, Low lux mode, and BLC settings.

Auto electronic shutter (AES): The default iris setting of the CCD is fixed mode, and the AES option

will be 1/50 (1/60). There are several options for AES: 1/50 (1/60), 1/100 (1/120), 1/250, 1/500, 1/1000, 1/200, and 1/4000. Faster electronic shutter would enable the Network Camera to capture fast-moving objects more clearly. Once the shutter is selected as Auto, the iris of the CCD will become fixed.

Auto tracking white balance: This option is usually selected when the Network Camera is placed in outdoor environments. Adjusting the 0~8 level would help the Network Camera capturing video with correct colors. The default value is set to 4.

White balance control: Select this option will disable Auto tracking white balance. This option is usually selected when the Network Camera is placed in indoor environments. The administrator can adjust the value for best color temperature: 3200k, 4000k, 4800k, 5600k, 6400k, 7200k, 8000k.

Low lux mode: Select this option would enable the Network Camera to capture clear images in poor illuminative environments.

Auto switch to B/W in low lux mode: Select it to enable the Network Camera to automatically switch to B/ W in low lux mode.

User's Manual - 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents IP Surveillance Table of Contents Read Before Use Package ContentsRear panel Physical DescriptionDI/DO Diagram Hardware Reset Hardware Installation InstallationNetwork Deployment Setup the Network Camera over the InternetInternet connection with static IP When using a PoE-enabled switch Software Installation Using Web Browsers Accessing the Network CameraVivotek Using Rtsp Players MPEG-4 Using 3GPP-compatible Mobile DevicesUsing Vivotek Recording Software Main Configuration Area Vivotek Video Control Buttons Drop-down List of Preset Positions Client Settings MP4 Saving Options Configuration System SystemDI and do System TimeSecurity Root PasswordManage Privilege Manage UserHttps Hypertext Transfer Protocol over SSL Enable HttpsCreate and Install Certificate Method Https Create self-signed certificate manually Vivotek Vivotek Network Type NetworkPPPoE Point-to-point over Ethernet Steps to enable the UPnPTM user interface on your computer Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Http Two way audio HttpsFTP Rtsp Streaming Vivotek Wireless LAN PZ7112/PZ7122 only Vivotek Vivotek Ddns Ddns Dynamic domain name serviceCustomSafe100 General Settings Access ListFilter IP address 192.168.2.x will be bolcked Administrator IP addressAudio and Video Video SettingsImage Settings CCD Adjustment Advanced Mode Video quality settings for stream 1 / stream 2 Advanced Mode Ntsc Audio Settings Motion Detection Follow the steps below to enable motion detectionPercentage = 30% Camera Control Preset LocationsPatrol Settings Return to Home Position while Idle Digital ZoomZoom Times Display Logo Homepage LayoutPreview Theme Options Vivotek Customized Script ApplicationEvent Settings Trigger Event Schedule Vivotek Vivotek Server Type Server SettingsVivotek Vivotek Media Type Media SettingsTrigger Activation Format is Yyyymmdd Click to open the directory Format is HH 24r Recording Recording SettingsRecording Settings 20081120 20081121 20081122 Current Log System LogRemote Log View Parameters Reboot MaintenanceRestore CalibrateExport / Upload Files Upgrade Firmware Reboot system now This connection will close Appendix URL Commands for the Network CameraGet Server Parameter Values General CGI URL Syntax and ParametersSecurity Level Parameter pair Set Server Parameter ValuesGroupname Valid Values Description Available parameters on the serverName Value Edinburgh, Lisbon, London Name Value Security Description Get/set Normalstate High Name Subgroup of network http Subgroup of network sip OPEN, Shared Denyi0~9end 0.0 ~ Denied ending IPv4 address for connection Qcif Name Value Security TZO Logemerg Font color Themecolorconfigfont Bit 8 = Invalidate bit 1 ~ Bit 2 = External or built-in zoom function 0built-in Audioextmic Boolean Parameter Value Enable or disable trigger digital output Enable or disable this server action Group mediai0~4 mediafreespace is used internally Bit0 LSB = serveri0 Drive the digital output Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\n Query Status of the Digital InputCapture Single Snapshot Query Status of the Digital OutputQuality Account ManagementSystem Logs Upgrade FirmwareCamera Control Recall Preset LocationsHttp//servername/cgi-bin/sysinfo.cgi System InformationGet SDP of Streams IP FilteringOpen the Network Stream ．PZ7112 Ntsc CCD, Wlan Technical SpecificationsTechnology License Notice Liability Electromagnetic Compatibility EMC
Related manuals
Manual 118 pages 11.39 Kb
Top Page Image Contents