Vivotek PZ7112 manual Patrol Settings

Page 60

VIVOTEK

Patrol Settings

You can select preset locations for the Network Camera to patrol.

Please follow the steps below to set up a patrol schedule:

1.Click a preset location on the list and click Select.

2.The selected preset locations will be displayed on the Selected locations list.

3.Set the Dwelling time for the preset location during auto patrol. The default value is 10 seconds. You can also manually set a value and click Update.

4.Repeat step 1 and 3 to select additional preset locations.

5.If you want to delete a selected location, select it from the list and click Remove.

6.Select a location and click Up or Down to rearrange the patrol order.

7.Adjust the Auto pan/patrol speed. (1~5 seconds)

8.Click Save to enable the settings.

1

ZOOM x10 xE2

2

5

6

7

3

8

60 - User's Manual

Image 60
Contents IP Surveillance Table of Contents Package Contents Read Before UsePhysical Description Rear panelDI/DO Diagram Hardware Reset Installation Hardware InstallationSetup the Network Camera over the Internet Network DeploymentInternet connection with static IP When using a PoE-enabled switch Software Installation Accessing the Network Camera Using Web BrowsersVivotek Using Rtsp Players Using 3GPP-compatible Mobile Devices MPEG-4Using Vivotek Recording Software Main Configuration Area Vivotek Video Control Buttons Drop-down List of Preset Positions Client Settings MP4 Saving Options Configuration System SystemSystem Time DI and doRoot Password SecurityManage Privilege Manage UserEnable Https Create and Install Certificate MethodHttps Hypertext Transfer Protocol over SSL Https Create self-signed certificate manually Vivotek Vivotek Network Network TypePPPoE Point-to-point over Ethernet Steps to enable the UPnPTM user interface on your computer Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Http Https Two way audioFTP Rtsp Streaming Vivotek Wireless LAN PZ7112/PZ7122 only Vivotek Vivotek Ddns Dynamic domain name service DdnsCustomSafe100 Access List General SettingsFilter Administrator IP address IP address 192.168.2.x will be bolckedVideo Settings Audio and VideoImage Settings CCD Adjustment Advanced Mode Video quality settings for stream 1 / stream 2 Advanced Mode Ntsc Audio Settings Follow the steps below to enable motion detection Motion DetectionPercentage = 30% Preset Locations Camera ControlPatrol Settings Digital Zoom Zoom Times DisplayReturn to Home Position while Idle Homepage Layout PreviewLogo Theme Options Vivotek Application Customized ScriptEvent Settings Trigger Event Schedule Vivotek Vivotek Server Settings Server TypeVivotek Vivotek Media Settings Media TypeTrigger Activation Format is Yyyymmdd Click to open the directory Format is HH 24r Recording Settings RecordingRecording Settings 20081120 20081121 20081122 System Log Remote LogCurrent Log View Parameters Maintenance RebootRestore CalibrateExport / Upload Files Upgrade Firmware Reboot system now This connection will close URL Commands for the Network Camera AppendixGeneral CGI URL Syntax and Parameters Security LevelGet Server Parameter Values Set Server Parameter Values Parameter pairGroupname Available parameters on the server Valid Values DescriptionName Value Edinburgh, Lisbon, London Name Value Security Description Get/set Normalstate High Name Subgroup of network http Subgroup of network sip OPEN, Shared Denyi0~9end 0.0 ~ Denied ending IPv4 address for connection Qcif Name Value Security TZO Logemerg Font color Themecolorconfigfont Bit 8 = Invalidate bit 1 ~ Bit 2 = External or built-in zoom function 0built-in Audioextmic Boolean Parameter Value Enable or disable trigger digital output Enable or disable this server action Group mediai0~4 mediafreespace is used internally Bit0 LSB = serveri0 Drive the digital output Query Status of the Digital Input Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\nQuery Status of the Digital Output Capture Single SnapshotAccount Management QualityUpgrade Firmware System LogsCamera Control Preset Locations RecallSystem Information Http//servername/cgi-bin/sysinfo.cgiIP Filtering Get SDP of StreamsOpen the Network Stream Technical Specifications .PZ7112 Ntsc CCD, WlanTechnology License Notice Electromagnetic Compatibility EMC Liability
Related manuals
Manual 118 pages 11.39 Kb