Vivotek PZ7112 manual Ntsc

Page 55

VIVOTEK

There are four parameters provided in MPEG-4 mode which allow you to adjust the video performance:

■ Frame size

Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are selectable in the following resolutions:

 

NTSC

PAL

 

704 x 480

704 x 576

CIF

352 x 240

352 x 288

QCIF

176 x 120

176 x 144

■ Maximum frame rate

This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video quality. The frame rates are selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and 30fps. You can also select Customize and manually enter a value.

■ Intra frame period

Determine how often to plant an I frame. The shorter the duration, the more likely you will get better video quality, but at the cost of higher network bandwidth consumption. Select the intra frame period from the following durations: 1/4 second, 1/2 second, 1 second, 2 seconds, 3 seconds, and 4 seconds.

■ Video quality

A complex scene generally produces a larger file size, meaning that higher bandwidth will be needed for data transmission. Therefore, if Constant bit rate is selected, the bandwidth utilization is fixed at a selected level, resulting in mutable video quality performance. The bit rates are selectable at the following rates: 20Kbps, 30Kbps, 40Kbps, 50Kbps, 64Kbps, 128Kbps, 256Kbps, 512Kbps, 768Kbps, 1Mbps, 2Mbps, 3Mbps, and 4Mbps. You can also select Customize and manually enter a value.

On the other hand, if Fixed quality is selected, all frames are transmitted with the same quality; bandwidth utilization is therefore unpredictable. The video quality can be adjusted to the following settings: Medium, Standard, Good, Detailed, and Excellent. You can also select Customize and manually enter a value.

If JPEG mode is selected, the Network Camera continuously sends JPEG images to the client, producing a moving effect similar to a filmstrip. Every single JPEG image transmitted guarantees the same image quality, which in turn comes at the expense of variable bandwidth usage. Because the media contents are a combination of JPEG images, no audio data is transmitted to the client.

There are three parameters provided in MJPEG mode to control the video performance:

■ Frame size

Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are selectable in the following resolutions:

 

NTSC

PAL

 

704 x 480

704 x 576

CIF

352 x 240

352 x 288

QCIF

176 x 120

176 x 144

User's Manual - 55

Image 55
Contents IP Surveillance Table of Contents Read Before Use Package ContentsRear panel Physical DescriptionDI/DO Diagram Hardware Reset Hardware Installation InstallationNetwork Deployment Setup the Network Camera over the InternetInternet connection with static IP When using a PoE-enabled switch Software Installation Using Web Browsers Accessing the Network CameraVivotek Using Rtsp Players MPEG-4 Using 3GPP-compatible Mobile DevicesUsing Vivotek Recording Software Main Configuration Area Vivotek Video Control Buttons Drop-down List of Preset Positions Client Settings MP4 Saving Options Configuration System SystemDI and do System TimeManage User Root PasswordSecurity Manage PrivilegeCreate and Install Certificate Method Enable HttpsHttps Hypertext Transfer Protocol over SSL Https Create self-signed certificate manually Vivotek Vivotek Network Type NetworkPPPoE Point-to-point over Ethernet Steps to enable the UPnPTM user interface on your computer Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Http Two way audio HttpsFTP Rtsp Streaming Vivotek Wireless LAN PZ7112/PZ7122 only Vivotek Vivotek Ddns Ddns Dynamic domain name serviceCustomSafe100 General Settings Access ListFilter IP address 192.168.2.x will be bolcked Administrator IP addressAudio and Video Video SettingsImage Settings CCD Adjustment Advanced Mode Video quality settings for stream 1 / stream 2 Advanced Mode Ntsc Audio Settings Motion Detection Follow the steps below to enable motion detectionPercentage = 30% Camera Control Preset LocationsPatrol Settings Zoom Times Display Digital ZoomReturn to Home Position while Idle Preview Homepage LayoutLogo Theme Options Vivotek Customized Script ApplicationEvent Settings Trigger Event Schedule Vivotek Vivotek Server Type Server SettingsVivotek Vivotek Media Type Media SettingsTrigger Activation Format is Yyyymmdd Click to open the directory Format is HH 24r Recording Recording SettingsRecording Settings 20081120 20081121 20081122 Remote Log System LogCurrent Log View Parameters Calibrate MaintenanceReboot RestoreExport / Upload Files Upgrade Firmware Reboot system now This connection will close Appendix URL Commands for the Network CameraSecurity Level General CGI URL Syntax and ParametersGet Server Parameter Values Parameter pair Set Server Parameter ValuesGroupname Valid Values Description Available parameters on the serverName Value Edinburgh, Lisbon, London Name Value Security Description Get/set Normalstate High Name Subgroup of network http Subgroup of network sip OPEN, Shared Denyi0~9end 0.0 ~ Denied ending IPv4 address for connection Qcif Name Value Security TZO Logemerg Font color Themecolorconfigfont Bit 8 = Invalidate bit 1 ~ Bit 2 = External or built-in zoom function 0built-in Audioextmic Boolean Parameter Value Enable or disable trigger digital output Enable or disable this server action Group mediai0~4 mediafreespace is used internally Bit0 LSB = serveri0 Drive the digital output Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\n Query Status of the Digital InputCapture Single Snapshot Query Status of the Digital OutputQuality Account ManagementSystem Logs Upgrade FirmwareCamera Control Recall Preset LocationsHttp//servername/cgi-bin/sysinfo.cgi System InformationGet SDP of Streams IP FilteringOpen the Network Stream .PZ7112 Ntsc CCD, Wlan Technical SpecificationsTechnology License Notice Liability Electromagnetic Compatibility EMC
Related manuals
Manual 118 pages 11.39 Kb