Vivotek IP2121, IP2111 user manual Appendix, Post procedure

Page 90

Appendix

A. POST procedure

After the power has been turned on, NetworKam will perform a self-diagnostic to locate any possible hardware defects. If the power indicator is dim at the beginning, the power fails to proceed further. While the POST is proceeding, the status LED indicators will keep blinking interchanged until finished or any fatal error happens. If either status LED indicator is dim at the beginning, the LED may be broken.

Any possible fatal error has a special pattern shown in the following table. LED2 is the one below the network indicator and LED3 is the lowest one. If the POST is successful, status LED indicators will both shut off for a while and then light depending on the chosen network interface. If Ethernet is available, LED2 will flash like a heartbeat after network installation is done. Otherwise if modem is available, LED2 will flash alike to indicate listening for dial-in connection while LED3 is lit. If the included null modem cable is connected, both LEDs will stay on and then LED2 will start flashing after the connection from the PC is opened for configuration and LED3 stays lit.

LED pattern after POST

Possible failed component

Failed function

 

 

 

LED2 and LED2 blink at same time

U32(SAA7113)

Video decoder

 

 

 

LED2 ON and LED3 OFF

U1(TM1300)

PCI bridge of TM1300

 

 

 

LED2 OFF and LED3 ON

U6(RTL8139C)

Ethernet controller

 

 

 

LED2 ON and LED3 ON

U6(RTL8139C), U7, U8

Ethernet interface*

 

 

 

LED2 blink and LED3 ON

U22(M5823)

Real-time clock

 

 

 

LED2 ON and LED3 blink

U19(16C1550CJ), P2

COM1 interface

 

 

 

Ethernet interface failure includes not only components on board but also Ethernet cable and the

devices of the opposite end.

89

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Page 89 Page 91
Image 90
Page 89 Page 91
Contents NetworKam Before You Use Table of Contents Web URL commands of NetworKam Appendix Package Contents 886-2-22404099 886-2-22404097 Ethernet 10/100 socket Physical DescriptionRear Panel COM portGeneral I/O terminal block Status LEDs Restore button Power adapterAuto Iris Lens Connector How to Install Hardware installation Ethernet EnvironmentCable connection Power on Software configuration Easy way with installer program886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Manual way with existing programs First access to NetworKam 886-2-22404099 886-2-22404097 Modem Environment Cable connection Install a new modem 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Setup a new connection 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 First access to NetworKam 886-2-22404099 886-2-22404097 How to Use Authentication 886-2-22404099 886-2-22404097 Primary user’s capability Main screen with camera viewVideo quality selection Video size selection Pan/Tilt positioning device control System configuration System parameters User group administration Network settings 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Video parameters 886-2-22404099 886-2-22404097 Camera positioning device configuration 886-2-22404099 886-2-22404097 Modem and dial-up settings 886-2-22404099 886-2-22404097 Application 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Demonstration account settings Homepage layout settings One-shot fast configuration via FTP Read only string Text mode or 1 for image mode For fuchsia, 12 for silver, 13 for red, 14 for blue Standard IP format or string shorter than 40 characters Video Or RS485 Alert Demo Alarm settings Advanced functionsViewing system log Restore factory default settingsClear data path for proprietary commands Viewing system parametersViewing and downloading the stored snapshots Downloading the update snapshotsUploading snapshots periodically to an external FTP server Customizing images of homepageUploading the configuration file Software revision upgradeEasy way via Upgrade Wizard Stop information dumping System core debuggingMonitor changed status of digital inputs Query status of digital inputsReset system Skip installation at next bootReset network for new settings Set digital outputsURL commands of NetworKam Capture update Snapshot of video channelDisplay images 886-2-22404099 886-2-22404097 Move positioning device in PT direction Clear data mode serial port driverGet stored snapshots from Flash memory Drive digital outputsRestart system URL System resource URL General format of command URL System configuration URLUsers configuration URL Network configuration URL Video configuration URL Image quality configuration URL Camera control configuration URLCamera custom command configuration URL Modem Configuration URLApplication configuration URL Motion detection configuration URLDemo configuration URL Homepage layout configuration URLPost procedure AppendixFrequently asked questions 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Technical specifications NetworkingElectromagnetic Compatibility EMC

IP2111, IP2121 specifications

Vivotek, a renowned leader in the IP surveillance industry, has a diverse range of IP cameras designed for various security applications. Among these, the Vivotek IP2121 and IP2111 stand out due to their advanced features, robust technologies, and reliable characteristics.

The Vivotek IP2121 and IP2111 are both designed for high-quality video surveillance. The IP2121 features a 1-Megapixel sensor capable of delivering stunningly clear images with a resolution of 1280 x 800 pixels. This ensures that every detail is captured, whether during the day or night. On the other hand, the IP2111 is equipped with a similar sensor but focuses on delivering a more compact and cost-effective solution for users who require less intensive surveillance needs. Both models support H.264 compression technology, which significantly reduces file sizes without compromising image quality, thereby optimizing bandwidth usage and storage space.

One of the important aspects of both cameras is their superior low-light performance. The Vivotek IP2121 is designed with a day/night function, which automatically switches from color to monochrome mode when light levels drop, ensuring clear images even in challenging lighting conditions. This feature is complemented by WDR (Wide Dynamic Range) technology, which enhances image quality in scenes with high contrast between light and shadow.

Both models boast a weather-proof IP66 rating, making them suitable for outdoor installations. This feature protects the cameras against rain, dust, and other harsh environmental conditions. The cameras are also powered over Ethernet (PoE), allowing for easy installation without the need for additional power supplies.

In terms of monitoring capabilities, the Vivotek IP2121 and IP2111 support multiple streaming formats, ensuring compatibility with various video management systems (VMS). They come with built-in motion detection capabilities, which can trigger alerts and notifications when suspicious movement is detected.

The user-friendly interface of Vivotek's software ensures that setting up and managing the cameras is straightforward. These features, coupled with the ability to easily integrate with other Vivotek devices, provides a comprehensive surveillance solution.

Overall, the Vivotek IP2121 and IP2111 represent reliable choices for users seeking efficient, high-quality surveillance systems that combine advanced technology with durability, making them perfect for both residential and commercial applications.
Top Page Image Contents