Vivotek IP2121, IP2111 user manual Restore button, Power adapter, Auto Iris Lens Connector

Page 12

Restore button

There is a button hidden in the box for restoring the system factory default settings. When the system fails to install or operates abnormally, use the included assistant stick in the package and follow the following procedures to reset the system back to its original status.

Poke the assistant stick into the hole to press down on the restore button. Restart the system by unplugging and re-plugging the power jack. While keeping the button pressed, the system will perform POST twice rather than the usual once, which can be observed from the flashing LEDs. After the system flashes the LEDs for the second time, withdraw the stick to release the button. The system will have restored factory default settings at that moment.

Power adapter

Connect the power jack of the included power adapter. Connecting the power adapter should be the last operation while physically installing NetworKam.

Auto Iris Lens Connector

If the auto iris lens is used, AES on rear panel must be turned OFF. And you also have to select VIDEO Drive or DC Drive lens by the switch.

The pin assignment of the auto iris lens connector is as follows:

 

VIDEO Drive

DC Drive

 

 

 

Pin 1

Power source

Damp-

 

 

 

Pin 2

Video signal

Damp+

 

 

 

Pin 3

Not used

Driver+

 

 

 

Pin 4

Ground, Shield

Driver-

 

 

 

11

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Image 12
Contents NetworKam Before You Use Table of Contents Web URL commands of NetworKam Appendix Package Contents 886-2-22404099 886-2-22404097 Physical Description Rear PanelEthernet 10/100 socket COM portGeneral I/O terminal block Status LEDs Restore button Power adapterAuto Iris Lens Connector How to Install Hardware installation Ethernet EnvironmentCable connection Power on Software configuration Easy way with installer program886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Manual way with existing programs First access to NetworKam 886-2-22404099 886-2-22404097 Modem Environment Cable connection Install a new modem 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Setup a new connection 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 First access to NetworKam 886-2-22404099 886-2-22404097 How to Use Authentication 886-2-22404099 886-2-22404097 Primary user’s capability Main screen with camera viewVideo quality selection Video size selection Pan/Tilt positioning device control System configuration System parameters User group administration Network settings 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Video parameters 886-2-22404099 886-2-22404097 Camera positioning device configuration 886-2-22404099 886-2-22404097 Modem and dial-up settings 886-2-22404099 886-2-22404097 Application 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Demonstration account settings Homepage layout settings One-shot fast configuration via FTP Read only string Text mode or 1 for image mode For fuchsia, 12 for silver, 13 for red, 14 for blue Standard IP format or string shorter than 40 characters Video Or RS485 Alert Demo Alarm settings Advanced functionsRestore factory default settings Clear data path for proprietary commandsViewing system log Viewing system parametersDownloading the update snapshots Uploading snapshots periodically to an external FTP serverViewing and downloading the stored snapshots Customizing images of homepageUploading the configuration file Software revision upgradeEasy way via Upgrade Wizard System core debugging Monitor changed status of digital inputsStop information dumping Query status of digital inputsSkip installation at next boot Reset network for new settingsReset system Set digital outputsURL commands of NetworKam Capture update Snapshot of video channelDisplay images 886-2-22404099 886-2-22404097 Clear data mode serial port driver Get stored snapshots from Flash memoryMove positioning device in PT direction Drive digital outputsRestart system URL System resource URL General format of command URL System configuration URLUsers configuration URL Network configuration URL Video configuration URL Image quality configuration URL Camera control configuration URLCamera custom command configuration URL Modem Configuration URLApplication configuration URL Motion detection configuration URLDemo configuration URL Homepage layout configuration URLPost procedure AppendixFrequently asked questions 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Technical specifications NetworkingElectromagnetic Compatibility EMC

IP2111, IP2121 specifications

Vivotek, a renowned leader in the IP surveillance industry, has a diverse range of IP cameras designed for various security applications. Among these, the Vivotek IP2121 and IP2111 stand out due to their advanced features, robust technologies, and reliable characteristics.

The Vivotek IP2121 and IP2111 are both designed for high-quality video surveillance. The IP2121 features a 1-Megapixel sensor capable of delivering stunningly clear images with a resolution of 1280 x 800 pixels. This ensures that every detail is captured, whether during the day or night. On the other hand, the IP2111 is equipped with a similar sensor but focuses on delivering a more compact and cost-effective solution for users who require less intensive surveillance needs. Both models support H.264 compression technology, which significantly reduces file sizes without compromising image quality, thereby optimizing bandwidth usage and storage space.

One of the important aspects of both cameras is their superior low-light performance. The Vivotek IP2121 is designed with a day/night function, which automatically switches from color to monochrome mode when light levels drop, ensuring clear images even in challenging lighting conditions. This feature is complemented by WDR (Wide Dynamic Range) technology, which enhances image quality in scenes with high contrast between light and shadow.

Both models boast a weather-proof IP66 rating, making them suitable for outdoor installations. This feature protects the cameras against rain, dust, and other harsh environmental conditions. The cameras are also powered over Ethernet (PoE), allowing for easy installation without the need for additional power supplies.

In terms of monitoring capabilities, the Vivotek IP2121 and IP2111 support multiple streaming formats, ensuring compatibility with various video management systems (VMS). They come with built-in motion detection capabilities, which can trigger alerts and notifications when suspicious movement is detected.

The user-friendly interface of Vivotek's software ensures that setting up and managing the cameras is straightforward. These features, coupled with the ability to easily integrate with other Vivotek devices, provides a comprehensive surveillance solution.

Overall, the Vivotek IP2121 and IP2111 represent reliable choices for users seeking efficient, high-quality surveillance systems that combine advanced technology with durability, making them perfect for both residential and commercial applications.