Vivotek ip7135 manual Definitions in Configuration

Page 24

Definitions in Configuration

Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame page of configuration. If the Administrator also wants to set certain options through the URL, read the reference appendix for details.

<url> http://<Network Camera>/setup/config.html

<Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.html

<Network Camera> is the domain name or original IP address of the Network Camera.

- 23 -

www.vivotek.com

Image 24
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 5558 5556Live.sdp Group IPFilter176x144 for mobile 640x480 ForComputer 512000For 60Hz only AAC4 for computerGamr for mobile 12800012200 Usernameemail Application page CGI command Script.vssxIP address 514Syntax For snapshot Prefixappindex Capture single snapshot MaxsizeAccount management Privilege=confConfiguration file System logsUpgrade firmware Post dataTechnical specifications System MicrophoneTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability
Related manuals
Manual 61 pages 57.58 Kb