Vivotek ip7135 manual Security settings

Page 26

Security settings

“Root password” Change the Administrator’s password by typing in the new password identically in both text boxes. The typed entries will be displayed as asterisks

for security purposes. After pressing , the web browser will ask the Administrator for the new password for access.

“Add user” Type the new user's name and password and press to insert the new entry. The new user will be displayed in the user name list. There is a maximum of twenty user accounts.

“Manager user” Pull down the user list to find the user’s name and press to complete.

<url> http://<Network Camera>/setup/security.html

<Network Camera> is the domain name or original IP address of the Network Camera.

- 25 -

www.vivotek.com

Image 26
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetAdd Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Snapshot file name prefix Application settingsWeekly schedule Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Status LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 Live.sdp 55585556 Group IPFilterComputer 176x144 for mobile640x480 For 512000Gamr for mobile For 60Hz onlyAAC4 for computer 12800012200 Usernameemail IP address Application page CGI commandScript.vssx 514Syntax For snapshot Prefixappindex Capture single snapshot MaxsizeAccount management Privilege=confConfiguration file System logsUpgrade firmware Post dataTechnical specifications System MicrophoneTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability
Related manuals
Manual 61 pages 57.58 Kb