Vivotek ip7135 manual System log

Page 42

System log

The Network camera support log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to turn on the facility for receiving log from remote machine. Or you can use some software on Windows which is compliant to RFC 3164.

Check “Enable remote log” and input the “IP address” and “port” number of the log server to enable the remote log facility.

In the “Current log”, it displays the current system log file. The content of the log provides useful information about configuration and connection after system boot- up.

- 41 -

www.vivotek.com

Image 42

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Snapshot file name prefix Application settingsWeekly schedule Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 Live.sdp 55585556 Group IPFilterComputer 176x144 for mobile640x480 For 512000Gamr for mobile For 60Hz onlyAAC4 for computer 12800012200 Usernameemail IP address Application page CGI commandScript.vssx 514Syntax For snapshot Prefixappindex Capture single snapshot MaxsizeAccount management Privilege=confConfiguration file System logsUpgrade firmware Post dataTechnical specifications System MicrophoneTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability

Related manuals

Manual 61 pages 57.58 Kb