Vivotek ip7135 manual Prefixappindex

Page 60

Return:

HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <length>\r\n \r\n

<depends on method value> If(method == get method == set)

{

tue=<value>\r\n

wed=<value>\r\n

}

Else if(method == normal)

{

Application page contents

}

parameter

Value

description

 

 

 

prefix_app_index

sn1, sn2, vc

Index of application

snapshot_enable

0

Enable snapshot application

 

1

Disable snapshot application

 

 

 

videoclip_enable

0

Disable videoclip application

 

1

Enable videoclip application

 

 

 

weekday

0,1,2,3,4,5,6

The array indicate weekly schedule

time_method

always

24 hours full day

 

interval

Select begin time and end time

 

 

 

begin_time

hh:mm

Begin time of weekly schedule

end_time

hh:mm

End time of weekly schedule

prefix

<text string

Snapshot/Videoclip file name prefix for both

 

shorter than 60

event and sequential operation

 

characters>

 

 

 

 

- 59 -

www.vivotek.com

Image 60
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Installation Hardware installationSoftware installation To install in EthernetInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Re-connect Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Length is the actual length of content Set server parameter valuesWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0554 5558 5556Live.sdp Group IPFilter176x144 for mobile 640x480 ForComputer 512000For 60Hz only AAC4 for computerGamr for mobile 12800012200 Usernameemail Application page CGI command Script.vssxIP address 514Syntax For snapshot Prefixappindex Capture single snapshot MaxsizeAccount management Privilege=confConfiguration file System logsUpgrade firmware Post dataTechnical specifications System MicrophoneTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability
Related manuals
Manual 61 pages 57.58 Kb