Vivotek ip7135 manual Software installation, To install in Ethernet

Page 9

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady blue, go to next paragraph “Software installation”. If the Ethernet is not available, Network Camera will switch to wireless LAN mode.

Software installation

At the end of the hardware installation, users can use Installation Wizard program included in the product CDROM to find the location of the Network Camera. There may be many Network Cameras in the local network. Users can differentiate the Network Cameras with the serial number. The serial number is printed on the labels on the carton and the back of the Network Camera body. Please refer to the user’s manual of Installation Wizard for detail.

- 8 -

www.vivotek.com

Image 9

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Hardware installation InstallationTo install in Ethernet Software installationInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Re-connect Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Page Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpUrl http//Network Camera/setup/network.html Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Weekly schedule Application settingsSnapshot file name prefix Send out the snapshot while motion detectionMethod for sending snapshot Sequential operationPage Page System log Viewing system parameters Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Set server parameter values Length is the actual length of contentWhere parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group Security255.255.255.0 192.168.0.99554 5556 5558Live.sdp Group IPFilter640x480 For 176x144 for mobileComputer 512000AAC4 for computer For 60Hz onlyGamr for mobile 12800012200 Usernameemail Script.vssx Application page CGI commandIP address 514Syntax For snapshot Prefixappindex Maxsize Capture single snapshotPrivilege=conf Account managementSystem logs Configuration filePost data Upgrade firmwareSystem Microphone Technical specificationsMPEG-4 AAC Technology Technology License NoticeLiability Electromagnetic Compatibility EMC

Related manuals

Manual 61 pages 57.58 Kb