Configuring your Rovio the first time
Mac users
7.Now you will configure Rovio’s network settings to work with your router. In the Rovio interface, click on the Settings button located at the top right. Select the Network tab.
8.In the SSID field, type in the name of your wireless network (i.e. your router).
9.Change the mode to Infrastructure.
10.Next, if you use a wireless network password, you will need to enter it.
Select the type of Encryption (e.g. WEP 64) and then select the type of Key (e.g. ASCII). Enter the router’s password in the field.
11.In the IP Setup section select
Manually
12.In the IP address field, enter the IP address you noted down at step 3.
13.Using the settings you noted at step 2c, enter the Subnet mask, Default gateway (this is your router’s IP) and DNS (if any) information, and then click on Update.
14.You now need to connect to your wireless network. From the System Preferences item of your Apple menu, select Network, then AirPort, and then
Your Rovio is now connected to your internal wireless network.
20