Arcam P1, C31 manual Remote-control codes

Remote-control codes

The following tables give the IR-commands accepted by the C31.

Power commands		Menu navigation commands
Command	Decimal Code	Command	Decimal Code
Power toggle	16–12	UP	16–32
Power-on	16–123	DOWN	16–33
Power-off	16–124	SELECT	16–37
		ENTER	16–87
Source selection commands
Command	Decimal Code	Display control commands
PHONO select	16–1	Command	Decimal Code
AV select	16–2	Display	16–59
TUNER select	16–3
DVD select	16–4	Volume control commands
TAPE select	16–5	Command	Decimal Code
VCR select	16–6	Mute	16–13
CD select	16–7	Volume up	16–16
AUX select	16–8	Volume down	16–17

The following tables give commands accepted by the P35.

Power commands		Speaker control commands
Command	Decimal Code	Command	Decimal Code
Power toggle	16–12	Speaker 1 toggle	16–35
Power-on	16–123	Speaker 2 toggle	16–39
Power-off	16–124	Speaker 1 on	16–43
		Speaker 1 off	16–44
		Speaker 2 on	16–45
		Speaker 2 off	16–46

The following table gives commands accepted by the P1.

Power commands

Command	Decimal Code
Power toggle	16–12
Power-on	16–123
Power-off	16–124

Note that the C31 also responds to code 20–53 (the PLAY command for an Arcam CD player). The C31 swiches automatically to CD input on receiving this command.

C31/P35/P1

E-16