Arcam C31, P1 manual Using this handbook, Safety, Contents

Page 3

Using this handbook

Thank you for buying this quality Arcam product.

This handbook covers the following items:

<C31 pre-amplifier;

<P35 power amplifier;

<P1 power amplifier.

This handbook is intended to give you all the information you need to install and use these products. The C31 is described first, followed by the P35 and the P1. Use of the CR-389 remote control supplied with the C31 is also described.

If your amplifiers have been installed and set-up by an authorised Arcam dealer, you may wish to go directly to the sections on how to use this equipment. Otherwise we recommend reading carefully the installation instructions for your products before proceeding.

Safety

Safety guidelines are set out on page 2 of this handbook.

Many of these items are common-sense precautions but, for your own safety and to ensure that you do not damage the unit, we recommend that you read them.

Contents

 

English

Safety guidelines

E-2

 

Important safety instructions

E-2

 

Safety compliance

E-2

 

Using this handbook

E-3

 

Safety

E-3

 

Installation: C31 pre-amplifier

E-4

 

Positioning the unit

E-4

 

Connecting to other equipment

E-4

 

Connecting to a power supply

E-5

 

Switching the C31 on

E-6

 

Changing the volume

E-6

 

Selecting an audio source

E-6

 

Using your C31 pre-amplifier

E-6

 

Recording an audio source

E-7

 

Listening using headphones

E-7

 

Product configuration

E-7

 

Configuring your C31 pre-amplifier

E-8

 

Introduction

E-8

 

Adjusting listening settings

E-8

 

Using the remote control

E-9

 

Installation: P35 and P1 power amplifiers

E-10

 

Positioning your power amplifier

E-10

 

Connecting to other equipment

E-10

 

Remote switching

E-11

 

Connecting loudspeakers

E-12

 

Connecting to a power supply

E-13

 

Using your power amplifier

E-14

 

Technical specifications

E-15

 

Remote-control codes

E-16

 

Troubleshooting

E-17

 

Guarantee

E-17

 

On-line registration

E-17

 

Environmental matters:

This handbook is printed in the U.K. on recycled paper, and is itself fully recyclable and biodegradeable.

The paper used is from the ‘Revive’ range of papers, manufactured in the U.K. by Robert Horne. In Revive, 75% of the paper is de-inked post-consumer waste, with the remaining 25% being mill broke and virgin fibre. The recycled pulps used in the production of this paper are a combination of Totally Chlorine Free (TCF) giving zero AOX and Elemental Chlorine Free (ECF) giving a resultant AOX level of less than 0.5Kg per 1000Kg of pulp.

C31/P35/P1

E-3

Image 3
Contents Pre Amplifier C31 Power Amplifier P35 Power Amplifier P1 Safety guidelines Important safety instructionsSafety compliance Using this handbook SafetyContents Positioning the unit Installation C31 pre-amplifierConnecting to other equipment General advice on connecting to other equipmentConnecting to a power supply Selecting an audio source Using your C31 pre-amplifierSwitching the C31 on Changing the volumeSelecting the source for recording Listening using headphonesProduct configuration Recording an audio sourceConfiguring your C31 pre-amplifier Adjusting listening settingsIntroduction CR-389 Remote Control Using the remote controlAudio in and Balanced Audio in P1 Installation P35 and P1 power amplifiersPositioning your power amplifier Input Selector Switch P1Remote switching Amplifier Gain Switch P1Daisy chaining Bi-wiring Connecting loudspeakersWiring strategies Single wiringBi-amping P35 connected to speakers using bi-ampingSP1 and SP2 P35 only Using your power amplifierP35 Power Amplifier Front panel P1 Power Amplifier Front panel Power buttonTechnical specifications Continual improvement policyC31 P35 Remote-control codes Troubleshooting GuaranteeOn-line registration Pembroke AVENUE, WATERBEACH, Cambridge CB5 9QR, England
Related manuals
Manual 52 pages 56.22 Kb

C31, P1 specifications

Arcam P1 and C31 are two essential components within the Arcam product line, known for their exceptional audio performance and advanced technologies. Both units are designed to cater to audiophiles and home theater enthusiasts, providing a blend of power, clarity, and versatility.

The Arcam P1 is a powerful class AB power amplifier that is engineered to deliver an impressive audio experience. With a power output of around 120 watts per channel into 8 ohms, it is capable of driving a wide range of speakers with ease. The P1 utilizes advanced circuitry and high-quality components to ensure low distortion and high fidelity. Its high current capability ensures that it can handle dynamic audio passages, making it suitable for both music and cinematic experiences.

One of the standout features of the P1 is its ability to integrate seamlessly into any audio setup. With multiple input options, including balanced XLR and unbalanced RCA connections, the amplifier can accommodate a variety of source components. Moreover, its compact design allows it to easily fit into a home theater rack without occupying unnecessary space.

The Arcam C31, on the other hand, serves as an advanced audio preamplifier and processor. It is designed to handle digital sources, providing a wealth of connectivity options, including HDMI inputs, DAC capabilities, and digital audio outputs. The C31 employs cutting-edge digital audio processing technologies to enhance sound quality and support high-resolution audio formats. It even supports various streaming protocols, allowing users to effortlessly access their digital music libraries.

Another key characteristic of the C31 is its intuitive user interface, which makes navigation through the numerous features straightforward. The device is equipped with a remote control, enabling users to adjust settings without having to physically interact with the unit. The C31's flexibility makes it an excellent choice not only for traditional home theater setups but also for modern, multi-room audio systems.

Together, the Arcam P1 and C31 create a formidable audio partnership that delivers stunning performance across various listening environments. Their combination of power, advanced technology, and user-friendly design makes them must-have components for anyone seeking to elevate their audio experience. Arcam’s commitment to quality and innovation is evident in these products, ensuring that users enjoy the best in sound reproduction.