Recording an audio source, Listening using headphones

Recording an audio source

The C31 allows listening to and recording from the same source, or listening to one source whilst recording another. The signal to be recorded is sent to both the TAPE and VCR output sockets.

Selecting the source for recording

The recording outputs can be configured in two ways:

1.to allow recording of the source being listened to;

2.to allow recording of a particular (specified) source, regardless of what is being listened to.

To record the source being listened to, press the RECORD button 2 repeatedly until the display shows ‘Record source’. After a few seconds the display reverts to showing the volume level, and you are ready to record.

In this configuration, selecting a different input changes the source that is routed to the recording outputs.

To record one source whilst listening to another, press RECORD again until the display shows ‘Record’ followed by the name of an input (e.g., ‘Aux’, ‘CD’, ‘Tuner’, etc.). Now press the source-selector button on the front-panel for the source you wish to record. Your selection is shown on the display for a few seconds, after which the display reverts to showing the volume level. You are now ready to record. Pressing a different source-selection button changes the source that you are listening to, but does not alter the source that is routed to the recording outputs.

Tape-to-tape copying (dubbing)

You can perform tape dubbing from VCR to TAPE, but not from TAPE to VCR.

For example, to copy from a cassette recorder connected to the VCR socket to a cassette recorder connected to the TAPE socket, first use the RECORD button as explained above and select ‘Record VCR’. This routes the VCR signal to the TAPE output.

Listening using headphones

	The headphone socket bl accepts headphones with an impedance rating between 8Ω and 2kΩ,
	fitted with a 6.5mm stereo jack plug. The pre-amp. outputs are muted when headphones are	Did you know: the
	plugged in.	Did you know: the
	plugged in.	original 6.5mm (or
	The headphone socket is always active, unless the volume has been muted.	original 6.5mm (or
		1/4”) head-phone jack,
		1/4”) head-phone jack,
		dates from 1878 for use
	Product configuration	in manual telephone
	Product configuration	exchanges – making
	The C31 has a configuration menu that allows various performance and behaviour aspects to be	exchanges – making
		it possibly the oldest
	altered. This menu is described in detail on the next page. Buttons have been provided on the	electrical connector
	front-panel to allow direct access to the most important configuration menu items:	standard on earth.
	4 BALANCE - gives direct access to the “Balance” menu item.	Source: en.wikipedia.org
	5 DISPLAY - this changes the display brightness. There are three brightness levels to chose
	from: ‘on’, ‘dimmed’ and ‘off’. If the C31 is switched off while the display is set to ‘off’, the
	display will be set to ‘dimmed’ when the C31 is switched on again.

9 REF - this toggles the volume display mode between ‘Standard’, ‘Fine’, and ‘Reference’ (these are described on the next page. When the ‘Reference’ volume display is selected, the light above the Ref button is illuminated.

bk TRIM - gives direct access to the “Trim” menu item.

C31/P35/P1

E-7

English

C31, P1 specifications

Arcam P1 and C31 are two essential components within the Arcam product line, known for their exceptional audio performance and advanced technologies. Both units are designed to cater to audiophiles and home theater enthusiasts, providing a blend of power, clarity, and versatility.

The Arcam P1 is a powerful class AB power amplifier that is engineered to deliver an impressive audio experience. With a power output of around 120 watts per channel into 8 ohms, it is capable of driving a wide range of speakers with ease. The P1 utilizes advanced circuitry and high-quality components to ensure low distortion and high fidelity. Its high current capability ensures that it can handle dynamic audio passages, making it suitable for both music and cinematic experiences.

One of the standout features of the P1 is its ability to integrate seamlessly into any audio setup. With multiple input options, including balanced XLR and unbalanced RCA connections, the amplifier can accommodate a variety of source components. Moreover, its compact design allows it to easily fit into a home theater rack without occupying unnecessary space.

The Arcam C31, on the other hand, serves as an advanced audio preamplifier and processor. It is designed to handle digital sources, providing a wealth of connectivity options, including HDMI inputs, DAC capabilities, and digital audio outputs. The C31 employs cutting-edge digital audio processing technologies to enhance sound quality and support high-resolution audio formats. It even supports various streaming protocols, allowing users to effortlessly access their digital music libraries.

Another key characteristic of the C31 is its intuitive user interface, which makes navigation through the numerous features straightforward. The device is equipped with a remote control, enabling users to adjust settings without having to physically interact with the unit. The C31's flexibility makes it an excellent choice not only for traditional home theater setups but also for modern, multi-room audio systems.

Together, the Arcam P1 and C31 create a formidable audio partnership that delivers stunning performance across various listening environments. Their combination of power, advanced technology, and user-friendly design makes them must-have components for anyone seeking to elevate their audio experience. Arcam’s commitment to quality and innovation is evident in these products, ensuring that users enjoy the best in sound reproduction.