Using the remote control, CR-389 Remote Control

Using the remote control

CR-389 Remote Control

The CR-389 remote control gives access to all functions available on the front panel of the C31. It also has controls to operate Arcam CD players and tuners.

TUNER

These buttons are used to control Arcam tuner functions.

Note that the FM/DAB lights indicate into which mode you are switching the remote control. The lights only illuminate for five seconds to conserve battery power.

If neither light is illuminated this does not mean that the remote control is not working.

*+ (UP and DOWN)

These buttons are used in the configuration menu and have the same effect as turning the control knob. Pressing * is the same as turning the control knob clockwise, + is the same as turning the knob anticlockwise.

ENTER

Performs the same function as the ENTER button on the front panel (see page 8).

SEL (Select)

Performs same function as the SELECT button on the front panel. It allows you to use the remote’s volume switch in the same way you use the control dial on the front panel – to adjust various amplifier settings (see page 8).

Pressing + corresponds to turning the control knob clockwise, – to anticlockwise.

Source selection buttons

These operate in the same way as the source selectors on the front panel of your C31.

TUNER

FM DAB

FM	MENU	DISP
DAB	MENU	DISP
DAB
1-9	2-10	3-11	4-12
5-13	6-14	7-15	8-16
MODE			BAND
		SP1
ENTER		SP2	DISP
ENTER			DISP
	SEL

PHONO AUX CD TUNER

AV DVD VCR TAPE

AMPLIFIER

RPT

PROG DISP

CR-389

English

Power/Stand-by

Toggles the C31 between stand-by mode and full power mode. The power indicator light on the front panel is red if the C31 is in stand-by, amber while it is powering-up (this takes only a few seconds) and green when the C31 is operational.

SP1 and SP2

These buttons are for use with the P35 amplifier, to allow you to select and deselect the main (SP1) and secondary (SP2) sets of speakers attached to it (see page 14 for further information).

DISP (display)

Cycles through the settings ‘Off’, ‘Dimmed’ and ‘Bright’. Turning the display ‘Off’ may give a slight improvement in sound quality.

Volume and - (mute)

Press + to increase volume or – to decrease the output volume of the amplifier.

Press - to mute the pre-amp outputs of the

C31. Note that both recording outputs will remain active. Mute is disabled by either pressing - again, or adjusting the volume.

CD controls

These offer basic control of Arcam CD players.

If you wish to use the same remote control for both your C31 and your DT91 tuner, please use the CR-389D remote control shipped with the tuner (instead of the remote control described here).

NOTE: Remember to install the two AAA batteries supplied before trying to use your remote control.

Do not place anything in front of the FMJ badge on the top left of the C31 (where the IR receiver is located), or the remote control may not work.

C31/P35/P1

E-9

C31, P1 specifications

Arcam P1 and C31 are two essential components within the Arcam product line, known for their exceptional audio performance and advanced technologies. Both units are designed to cater to audiophiles and home theater enthusiasts, providing a blend of power, clarity, and versatility.

The Arcam P1 is a powerful class AB power amplifier that is engineered to deliver an impressive audio experience. With a power output of around 120 watts per channel into 8 ohms, it is capable of driving a wide range of speakers with ease. The P1 utilizes advanced circuitry and high-quality components to ensure low distortion and high fidelity. Its high current capability ensures that it can handle dynamic audio passages, making it suitable for both music and cinematic experiences.

One of the standout features of the P1 is its ability to integrate seamlessly into any audio setup. With multiple input options, including balanced XLR and unbalanced RCA connections, the amplifier can accommodate a variety of source components. Moreover, its compact design allows it to easily fit into a home theater rack without occupying unnecessary space.

The Arcam C31, on the other hand, serves as an advanced audio preamplifier and processor. It is designed to handle digital sources, providing a wealth of connectivity options, including HDMI inputs, DAC capabilities, and digital audio outputs. The C31 employs cutting-edge digital audio processing technologies to enhance sound quality and support high-resolution audio formats. It even supports various streaming protocols, allowing users to effortlessly access their digital music libraries.

Another key characteristic of the C31 is its intuitive user interface, which makes navigation through the numerous features straightforward. The device is equipped with a remote control, enabling users to adjust settings without having to physically interact with the unit. The C31's flexibility makes it an excellent choice not only for traditional home theater setups but also for modern, multi-room audio systems.

Together, the Arcam P1 and C31 create a formidable audio partnership that delivers stunning performance across various listening environments. Their combination of power, advanced technology, and user-friendly design makes them must-have components for anyone seeking to elevate their audio experience. Arcam’s commitment to quality and innovation is evident in these products, ensuring that users enjoy the best in sound reproduction.