Recorded, Image is blurry, Image is too, Dark

AGFA CL50 manual Recorded, Image is blurry, Image is too, Dark

Page 49

ePhoto CL50 User’s Guide		49

Problem	Possible Cause/Solution

The recorded	The subject moved while you were taking
image is blurry.	the picture. Hold the camera steady and take
	the picture again.
	You moved the camera while you were tak-
	ing a picture. Take the picture again and hold
	the camera steady as you depress the shutter
	button.
	You used the wrong focus setting. Make
	sure the subject’s distance from the lens and
	the focus setting match. The ﬂash illuminates
	subjects up to a distance of only about 10
	feet (2.6 m).
	You manually set the shutter speed too low.
	Increase the shutter speed manually.

The recorded	There was not enough light. Set the ﬂash to
image is too	the Auto or Fill-in setting.
dark.	The subject was too far away for the ﬂash.
	The ﬂash illuminates subjects up to a dis-
	tance of only about 9 feet (2.8 m).
	You selected an incorrect advanced setting.
	Readjust the setting or set it to automatic.
	You can also use PhotoWise to adjust the
	brightness and contrast of your image.

Troubleshooting

Image 49

Contents

EPhoto CL50 User’s Guide User Information FCC InformationCanadian Radio Interference Regulations Statement EPhoto CL50 User’s Guide Year Limited Hardware WarrantyContents Troubleshooting Camera Specifications Introduction Shutter Button See Shutter Button on Camera PartsStatus Display See Status Display on Resolution Button See Resolution Button on LCD ON/OFF Switch See LCD ON/OFF Switch onFlash Button See Flash Button on Memory Card Capacity Inserting a Memory CardMemory Cards To insert a memory cardInserted Memory Card ConditionsOn the memory card Insert a new memory cardTo install the batteries Battery ConditionsBatteries Navigating the Menus Mode SwitchZoom Buttons Controlling the CameraShutter Button LCD ON/OFF SwitchInformation Button 14ePhoto CL50 User’s Guide Status DisplayTo take pictures Taking PicturesQuickReview Button Changing Basic SettingsTo turn on QuickReview To discard an image during processingTo turn on Macro mode or the self-timer Macro/Self-Timer ButtonTo take a picture with the self-timer EPhoto CL50 User’s Guide To record sound with an imageTo select a ﬂash setting Resolution ButtonTo select a resolution setting Flash ButtonMaximum 8 MB card capacity 96 images Maximum 8 MB card capacity 24 imagesChanging Settings on the Color ResolutionTo change a setting on the color LCD 1600 x 1200 pixels 1280 x 960 pixelsFlash 1280 x 960 pixels Burst mode 640 x 480 pixelsDigital Zoom 640 x 480 pixelsPreview Sets the resolution to 640 xPanorama Advanced Settings Changing Advanced Settings Tips on Using the Advanced MenuTo change an advanced setting on the color LCD Exposure FocusExposure manual Manual Aperture valueTo set an aperture value Select Aperture val. in the Exposure menuWhite Point MeteringSpot measures only a small spot at the center of the frame To select a metering methodExternal Flash To use a preset white pointTo set the white point manually Image on the LCD changes to reﬂect the new white pointTo save your Advanced settings Save Advanced SettingsPreferences OffTo set the self-timer delay Self-Timer DelayDate & Time Format SleepDate & Time EPhoto CL50 User’s Guide To set the sleep delayAutomatic To set the date and timeWorking with Captured Images Using Single-Image ViewScrolling through the Images To select a viewDeleting Images To lock/unlock images in single-image modeLocking/Unlocking Images To delete imagesRecording Sound Zooming in on an ImageTo zoom in on an image digitally Zoom is indicated by the icon on the imageTo tag images for print Printing ImagesViewing Images Using Multi-Image ViewTo view multiple images at one time Next- to select another image for deletion To delete images in multi-image modeTo lock/unlock images To change the slide show settings Using Slide Show ViewYou recorded with an image Working with Captured Images To view images on a TV Using the Camera with a TVChecking System Requirements Using the Camera with a ComputerIBM PCs and Compatibles MacintoshConnecting to Your Computer Installing PhotoWise SoftwareCreating Installation Diskettes for PhotoWise Transferring Images into Your ComputerWindows To create PhotoWise installation ﬂoppy disksCamera Care and MaintenanceAC Adapter Batteries Memory Cards Cleaning the CameraNo power TroubleshootingCamera is in PLAY. Slide the Mode Shutter butSure setting. If Normal preview setting Live imageColor LCD Doesn’t turn onImage is blurry RecordedImage is too DarkBrightness and contrast of your image Bright To AutoYou were too close to the subject i.e Take the picture againDeleted Apple Performa 640052ePhoto CL50 User’s Guide Camera Specifications640 x 480 pixels, burst mode Color Depth ResolutionBattery Life Continuous play approx hour NiMH Startup Time Seconds color LCD off Shutter DelayTimer Power DownSelf Timer TemperatureAgfa Corporation. All Rights Reserved

AGFA CL50 manual Recorded, Image is blurry, Image is too, Dark

ePhoto CL50 User’s Guide

Problem

The recorded

image is blurry.

the picture again.

button.

image is too

dark.

tance of only about 9 feet (2.8 m).