ePhoto CL50 User’s Guide | 51 | |
|
|
|
Problem | Possible Cause/Solution |
|
|
| |
PhotoWise can’t | The camera is off. Slide the Mode switch to | |
find the camera. | PLAY or REC. |
|
| The serial cable is connected incorrectly. |
|
| Check the cable and connections. |
|
| The batteries are too weak. Replace them. | |
| AppleTalk is active. Turn off AppleTalk |
|
| before using PhotoWise. |
|
| There is a port conflict. If the serial cable is | |
| connected to the modem port, turn off any |
|
| fax/modem software running in the back- |
|
| ground and disable any fax extensions. |
|
| Apple Performa 6400/ 5400: |
|
| The serial cable may have grounding prob- | |
| lems. For best results, update your operating | |
| system to System 7.6.1 or higher. If you can- | |
| not update your system, disconnect the cam- | |
| era, reboot the computer and reconnect the | |
| camera. |
|
| G3 Mac: Check Apple’s technical support at | |
| www.apple.com for a patch. |
|
| There is an internal device conflict in your | |
| computer. Check the documentation that |
|
| came with your computer and/or Mac OS. |
|
An image can’t be | The image is locked. Unlock the image. |
|
deleted. |
|
|
|
|
|
Troubleshooting