Vivotek PT7135 manual Url http//Network Camera/client.html

Page 21

Using multicast protocol can reduce traffic by simultaneously delivering a single stream of information to several clients. Please enable multicast options first from configuration page. And make sure your router support this technology.

The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured.

The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.

The HTTP protocol allows the media can be streaming through http port when the UDP or TCP protocol are blocked.

If no special need is required, UDP protocol is recommended. Generally speaking, the client’s choice will be in the order of UDP → TCP. After the Network Camera is connected successfully, “Protocol Option” will indicate the selected protocol. The selected protocol will be recorded in the user's PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol, save, and return HOME to re-connect.

<url> http://<Network Camera>/client.html

<Network Camera> is the domain name or the original IP address of the Network Camera.

- 20 -

www.vivotek.com

Image 21

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents To install in Ethernet Hardware installationSoftware Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityClient Settings ConfigurationCamera view View capabilitiesPage Pan speed Pan/tilt control buttonsTilt speed PanClient settings Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone For Best Real-time Video ImagesOnly Quality Images Will Do Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpPage Url http//Network Camera/setup/network.html Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings SnapshotWeekly schedule Send out the snapshot while motion detection Snapshot file name prefixSequential operation Method for sending snapshotPage Video Clip System log Viewing system parameters Calibrate MaintenanceTroubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Response Set server parameter valuesWhere parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server HhmmssBlank Group SecurityBlank 192.168.0.99255.255.255.0 Shorter 5558 5545556 Live.sdp176x144 for mobile 256640x480 For ComputerFor 60Hz only AAC4 for computerGamr for mobile 12200 PanspeedTiltspeed Presettilt0~9 Usernameemail Script.vssx Camera ControlIP address 514Recall Application page CGI command Prefixappindex Prefix Capture single snapshotAccount management Privilege=conf System logsUpgrade firmware Configuration filePage Networking Technical specificationsMPEG-4 AAC Technology Technology License NoticeLiability Electromagnetic Compatibility EMC