Vivotek PT7135 manual Definitions in Configuration

Page 28

Definitions in Configuration

Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame page of configuration. If the Administrator also wants to set certain options through the URL, read the reference appendix for details.

<url> http://<Network Camera>/setup/config.html

<Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.html

<Network Camera> is the domain name or original IP address of the Network Camera.

- 27 -

www.vivotek.com

Image 28

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents Hardware installation To install in EthernetSoftware Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsCamera view View capabilitiesPage Pan/tilt control buttons Pan speedTilt speed PanClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Best Real-time Video Images For Viewing by Mobile PhoneOnly Quality Images Will Do Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Snapshot Application settingsWeekly schedule Snapshot file name prefix Send out the snapshot while motion detectionSequential operation Method for sending snapshotPage Video Clip System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Set server parameter values ResponseWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server HhmmssGroup Security Blank192.168.0.99 Blank255.255.255.0 Shorter 554 55585556 Live.sdp256 176x144 for mobile640x480 For ComputerAAC4 for computer For 60Hz onlyGamr for mobile Panspeed 12200Tiltspeed Presettilt0~9 Usernameemail Camera Control Script.vssxIP address 514Recall Application page CGI command Prefixappindex Capture single snapshot PrefixAccount management System logs Privilege=confConfiguration file Upgrade firmwarePage Technical specifications NetworkingTechnology License Notice MPEG-4 AAC TechnologyElectromagnetic Compatibility EMC Liability