Vivotek PT7135 manual Software revision upgrade

Page 27

Software revision upgrade

Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “xxx.pkg” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.Or upgrade firmware from HTTP web page directly

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

- 26 -

www.vivotek.com

Image 27

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Configuration file Upgrade firmware Technical specifications Package Contents To install in Ethernet Hardware installationSoftware Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityView capabilities ConfigurationClient Settings Camera viewPage Pan Pan/tilt control buttonsPan speed Tilt speedClient settings Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone For Best Real-time Video ImagesOnly Quality Images Will Do Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpPage Url http//Network Camera/setup/network.html Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings SnapshotWeekly schedule Method for sending snapshot Snapshot file name prefixSend out the snapshot while motion detection Sequential operationPage Video Clip System log Viewing system parameters Calibrate MaintenanceTroubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Response Set server parameter valuesWhere parameter pair is parameter=value\r\n Hhmmss WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group SecurityBlank 192.168.0.99255.255.255.0 Shorter Live.sdp 5545558 5556Computer 256176x144 for mobile 640x480 ForFor 60Hz only AAC4 for computerGamr for mobile 12200 PanspeedTiltspeed Presettilt0~9 Usernameemail 514 Camera ControlScript.vssx IP addressRecall Application page CGI command Prefixappindex Prefix Capture single snapshotAccount management Privilege=conf System logsUpgrade firmware Configuration filePage Networking Technical specificationsMPEG-4 AAC Technology Technology License NoticeLiability Electromagnetic Compatibility EMC