Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition | LED color |
|
|
Loading system after power on | Steady red, blue, green |
|
|
During booting procedure | Steady red, blue, green |
|
|
Detecting and setting network | Steady green and blue. Blink red till physical |
| network and IP address are confirmed. |
|
|
After network is setup (system up) | Blink green every second and steady red |
|
|
During the upgrade firmware process | Blink green every second and fast blink red |
|
|
Enable audio | Steady blue. Disable audio will turn off blue |
| LED. |
|
|
Reset and restore
There is a button in the back side of the Network Camera. It is used to reset the system or restore the factory default settings.
RESET: Click on the button.
RESTORE:
1.Press on the button continuously.
2.Wait for all LED blink fast.
3.Free the button.
-51 -
www.vivotek.com